Federal

WELDER

Army National Guard Units ยท Department of the Army
๐Ÿ“ Santa Fe, New Mexico WG-10 $32 - $38/hr
Posted: Mar 17, 2026 Deadline: Apr 8, 2026 (Closes in 4 days days left)

About This Position

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. NEW MEXICO ARMY NATIONAL GUARD NATIONWIDE. All members of the New Mexico Army National Guard or current Active Duty/Reserve military members eligible and wiling to become members of the New Mexico Army National Guard **You may be eligible for a Recruitment OR Relocation incentive per agency's policy. This National Guard position is for a WELDER, Position Description Number D1215000.

Qualifications

Military Grades: Warrant Officer (CW2 and below), Enlisted (E-9 and below) Compatible Military Assignments: MOS: 88 series, 91 series, and 92 series. GENERAL EXPERIENCE: Experience or training that has provided the candidate with the basic knowledge of welding processes. Must have knowledge of technical orders, blueprints, and specifications SPECIALIZED EXPERIENCE: Experience or training demonstrating the application of a variety of electric resistance welding processes and equipment.

Experience in using accepted trade methods and a variety of manual welding processes to weld all types of commonly used metals in various shapes, sizes, and thicknesses. Experience using a wider range of metal welding processes to make more difficult welds meeting close tolerance, strength, and other requirements. These welds may be in hard-to-reach places.

Experience which allows the welder to devise special jigs and fixtures to hold the parts to be welded. Experience which demonstrates knowledge of several related trade procedures. Experience which enables the lay out and planning of work from blueprints, sketches, drawings, specifications, and work orders.

Major Duties

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The primary purpose of this position is to perform a variety of welding in support of maintenance activities. Performs welding duties using electric, acetylene, and/or inert gas shielded welding processes, pre-heating, brazing, head welding, tack welding, flame cutting, pressure welding, and heat treating.

Uses templates, jigs, blueprints, and other guides to repair, modify, or fabricate metal items including repair of light or intricately made mechanical parts, which must fit in assemblies where close tolerances are required. Makes numerous types of joints using flat, vertical, horizontal, and overhead positions on light and heavy equipment such as axles, frames, gun mounts and components, carriers, tanks, metal decks constructed of a variety of weldable metals. Welds or reinforces heavy armor plate.

Performs precision welding on jigs, dies, engineering and automotive equipment. Brazes dissimilar metals; flame cuts metal to size for fabrication, using regular welding equipment. Utilizes basic sheet metal tools and equipment such as a bender, press, roller, shear, and band saw to repair and/or fabricate a variety of equipment air conditioning and heater duct units, storage cabinets, and components for armored personnel carriers.

Reads and interprets blueprints and sketches. Lays out, positions, and clamps work; selects type of rod and size of tip to accomplish weld. Determines heat necessary; adjusts equipment accordingly. Manually maintains proper speed, flame motion, tip and angle, and position of the welding flame to produce desired pattern.

Performs other duties as assigned.

Education

You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.

How You Will Be Evaluated

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position.

If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Additional Information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). Recruitment Incentive: Recruitment Incentives are only authorized to those considered by federal government standards as newly appointed. To be newly appointed it must be the (1) first appointment as an employee of the Federal Government; (2) An appointment of a former employee of the Federal Government following a break in Federal Government service of at least 90 days; or (3) An appointment of an individual in the Federal Government when his or her service in the Federal Government during the 90-day period immediately preceding the appointment was not in a position excluded by ยง 575.104 and was limited to one or more of the following: (i) A time-limited appointment in the competitive or excepted service; (ii) A non-permanent appointment in the competitive or excepted service; (iii) Employment with the government of the District of Columbia (DC) when the candidate was first appointed by the DC government on or after October 1, 1987; (iv) An appointment as an expert or consultant under 5 U.S.C. 3109 and 5 CFR part 304; (v) Employment under a provisional appointment designated under 5 CFR 316.403; (vi) Employment under an Internship Program appointment under ยง 213.3402(a) of this chapter; or (vii) Employment as a Senior Executive Service limited term appointee or limited emergency appointee (as defined in 5 U.S.C. 3132(a)(5) and (a)(6), respectively).

Relocation Incentive: An authorized management official approves a relocation incentives paid in accordance with this volume to a current federal employee who must relocate, without a break in service, to accept a position in a different geographic area. Employee must establish a new residence in the new geographical area and maintain residency for the duration of service agreement. Employee must have a current and "Fully Successful" performance appraisal immediately prior to the move.

PROBATIONARY PERIOD: As a condition of employment for accepting this position, you will be required to serve a 2-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: - your performance and conduct; - the needs and interests of the agency; - whether your continued employment would advance organizational goals of the agency or the Government; and - whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

How to Apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12913818 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application.

You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package.

You will have the opportunity to upload additional documents to include in your application before it is submitted.

Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position.

Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Required Documents

To apply for this position, you must submit a complete Application Package which includes: 1.

Your resume showing: Contact Information-your name and the best way to contact you. Relevant work experience-include the employer's name, job title, start and end dates (month/year), the number of hours worked per week and describe how you meet the required qualifications of the job. Federal jobs should include series and grade. Education, certifications or licensures.

Frequently Asked Questions

What is the salary for the WELDER position at Army National Guard Units?
The salary range for this position is $32 - $38/hr. This is a WG-10 position on the General Schedule pay scale. Actual pay may vary based on locality adjustments.
Where is the WELDER job located?
This position is located in Santa Fe, New Mexico. This is an on-site position.
What qualifications do I need?
Military Grades: Warrant Officer (CW2 and below), Enlisted (E-9 and below) Compatible Military Assignments: MOS: 88 series, 91 series, and 92 series. GENERAL EXPERIENCE: Experience or training that has provided the candidate with the basic knowledge of welding processes. Must have knowledge of technical orders, blueprints, and specifications SPE...
How do I apply for this position?
Apply through USAJobs.gov by clicking the 'Apply on USAJobs' button. You'll need a USAJobs account, a federal-style resume, and supporting documents. The deadline is Apr 8, 2026.
Is a security clearance required?
No security clearance is required for this position.
What does WG-10 mean?
WG-10 refers to the General Schedule grade level. Higher grades require more experience and offer higher pay. Visit our GS Pay Scale page for full salary tables by grade and locality.
What benefits do federal employees receive?
Federal employees receive comprehensive benefits including health insurance (FEHB), retirement through FERS, Thrift Savings Plan (TSP) with government matching, paid annual and sick leave, paid parental leave, life insurance, and student loan repayment programs.