TOOLS AND PARTS ATTENDANT

Identifies user's tools, parts and equipment requirements and requisitions stock as needed. Watches and reports items that are in short supply because of breakage or are in need of repair. Recommends possible substitute or interchangeable items.

Sets up, shifts and maintains storage locations. Determines methods of storage, identification, and stock location considering such factors as temperature, humidity, height and weight limits, turnover, floor loading capacities, space available, and convenience of handling items. Compiles records concerned with quantity, cost, and type of material received, stored, and issued for a particular job.

Prepares periodic inventory and determines the basis for over, short, or misplaced items by checking such references as out-for-repair, issue, and turn-in records. Compiles reports on adjustments of inventory, stock records, spoilage, damage, location changes, and refusal of shipment. Ensures that tools and equipment are maintained in good condition by performing visual and operating checks.

May make minor repairs to tools and equipment, determine when damaged items are too costly to repair, and reports damaged or worn out equipment to superiors. Determines stock replenishment levels for centrally controlled supplies within funding limitations. Assures that supplies and monies are not wasted through excess accumulation and that items are on hand in sufficient quantities and at the time required.

In addition to established guides and formulas, determines quantities required and timely stock replenishment. Receives a wide variety of supplies and specialized items requiring special handling. Ensures that received items are properly stored in assigned locations.

Reviews requisitions for completeness and compliance with regulations and revises quantities ordered based on number on hand. Recommends substitution when supply items are not available. Searches for identifying or management data on items of supply.

Compares data listed on documents with reference sources such as federal catalogs, stock lists, or other publications. Receives requests needing additional information and compares with reference sources. Searches for stock number, prices, descriptions, and sources of supply.

Traces part number or type number to identify equipment/item manufacturer. Reviews supply transactions or provide customer service for urgent critical shortage items. Codes and classifies requisitions, shipping orders, and other documents.

Refers requests to other sources of supply or an inventory control point when stock is unavailable and/or cannot be shipped. Establishes procedures, management of calibration, and testing of Test Measurement and Diagnostic Equipment (TMDE). Establishes procedures, manages, implements and monitors tool room operations.

This includes accounting for, issuing and replacing tools. May assist with processing of hazardous materials by inspecting, receiving, sorting, accounting and classifying hazardous materials such as explosives, toxic chemicals, flammables, gas cylinders, radioactive material and hazardous waste. Performs other duties as assigned.

Once the application process is complete, a review of your application/resume will be made to determine your Area of Consideration (AOC) and to ensure you meet the basic eligibility and minimum job requirements.

Your initial rating will be based on your responses to the questionnaire in this document. This process measures the degree to which your background matches the knowledge, skills and abilities required for this position.

Your final rating will be based on our evaluation of your responses, as verified through a review of your resume and other supporting documents. If, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score can and will be adjusted to more accurately reflect your abilities. Please follow all instructions carefully. Errors or omissions may affect your eligibility and rating.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): Ability To Do The Work Of The Position Without More Than Normal Supervision, Ability to Interpret Instructions, Specifications, etc. (Other Than Blueprint Reading), Technical Practices (Theoretical, Precise, Artistic), and Work Practices (Including Keeping Things Neat, Clean, and in Order)

- INDEFINITE: Indefinite employees may be separated with a 30 days' notice. Indefinite employment is temporary and is expected to last more than one year but no more than five consecutive years. Indefinite employees may be converted to permanent without further competition.

AKNG permanent technician will retain their permanent status if selected for this position, and may be promoted, reassigned or changed to lower grade if selected for this position, and will be required to return to their permanent position unless action is made on a permanent basis. Permanent authorization may not cross service boundaries, or funding categories, (i.e., ARNG to ANG, or 176th WG to 168th WG). - The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission. - If you are a current Federal employee or former Federal employee, you must submit a copy of your latest SF-50 "Notification of Personnel Action" and/or a copy of the SF-50.

You may submit your most recent performance appraisal. - The National Guard is exempt from the Veterans Preference Act. Submission of a copy of your DD-214 is not required unless you are hired for technician position. - If you are a male applicant who was born after 12/31/59 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency. - Direct Deposit Program: If selected for technician position with the Alaska National Guard, you will be required to participate in the Direct Deposit Program. (Salary will be automatically deposited to bank/credit union account). - Military Bonuses And Student Loan Repayment Program: If you are selected for this position, you should always check with your servicing incentive manager (AKARNG - J1 or AKANG - Retention Office) to verify how accepting this position will affect your entitlement prior to considering an offer of employment.

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application.

You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package.

You will have the opportunity to upload additional documents to include in your application before it is submitted.

Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position.

Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

To determine your qualifications for this position, you must submit a complete Application Package which includes: 1.

Your resume showing work schedule, hours worked per week, dates of employment and duties performed.

1. Questionnaire. This is accomplished by submitting the application. There is nothing that needs to be attached to this application to meet this requirement.
2. Any additional documentation you wish to submit for consideration Your resume, curriculum vitae, the Optional Application for Federal Employment (OF 612), or any other written format you choose to describe your job-related qualifications can be submitted electronically using the document upload process. We recommend using the resume building within USAJOBS.

Please log into USAJOBS, go to your "Documents", make sure you're in the "Resumes" section and select the "Upload or build resume" button, then click on "Build resume". Please be sure to include all of the following information in your resume: Job Information: - Vacancy Identification Number, title, grade and location for which you are applying. Personal Information: - Full name, mailing address (with zip code) and day/evening telephone numbers (with area code). - Country of Citizenship. - If ever employed by the Federal Government, please show the highest Federal civilian grade held, job series, and dates of employment in grade.

Education: - High School name, city, state and zip code, date of diploma or GED. - Colleges and/or Universities attended, city, state and zip code. - Major field(s) of study. - Type and year of degree(s) received. If no degree received, show total credit hours received in semester or quarter hours. Work Experience for each paid or non-paid position held related to the job for which you are applying (do not provide copies of job descriptions): - Job title. - Duties and accomplishments. - Number of hours per week. - Employer's name and address. - Supervisor's name and phone number. - Indicate if your current supervisor may be contacted. - Starting and ending dates of employment (month and year). - Salary.

Other Qualifications: - Job-related training courses (title and year). - Job-related skills (e.g., other languages, computer software/hardware, tools, machinery, typing speed, etc.) - Job related certificates and licenses. - Job-related honors, awards, and special accomplishments. (e.g., publications, memberships in professional or honor societies, leadership activities, public speaking, performance awards, etc.) Do not send copies of documents unless specifically requested.