TITLE 32 SMALL ARMS REPAIRER (MI SMO - MATES)
About This Position
THIS IS AN ARMY NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a TITLE 32 SMALL ARMS REPAIRER (MI SMO - MATES), Position Description Number NGD1226000 and is part of the MI MATES, Michigan Army National Guard. MICHIGAN ARMY NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a Michigan Army National Guard recruiter prior to applying for this position.
Qualifications
Qualifications are based on breadth/level of experience.
In addition to describing duties performed, applicants must provide the dates of each period of employment (from MM/YYYY to MM/YYYY) and the number of hours worked per week. As qualification determinations cannot be made when resumes do not include the required information, failure to provide this information may result in disqualification. Applicants are encouraged to use the USAJOBS Resume Builder to develop their federal resume. For additional information see: What to include in your resume.
NOTE: All job seekers will be required to limit their resumes to 2 pages in length when applying for job opportunity announcements (JOAs) MILITARY GRADE: E1-WO1 Selectee(s) must be within the military grade(s) listed in this job announcement prior to the effective date of placement into the technician position to ensure to avoid grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO.
SPECIALIZED EXPERIENCE: Experience or training which demonstrates ability to work effectively and efficiently on weapons and mechanical systems in disassembly for repair, inspection to diagnose mechanical malfunctioning, wear and/or damage is required. Experience in adjustment of levers, gear linkages and synchronization of interrelated mechanical systems. Experience in applying technical manuals, regulations, specifications, and drawings to determine operation, assembly, and a tolerance of the variety of weapons cleaned, repaired, and modified, is required.
Experience in using and maintaining a variety of hand and power tools and gages is required. Tools include drills, files, saws, hammers, vises, and precision gages and measuring instruments such as micrometers, optical comparators, ultrasonic checkers, magnafluxing machines and/or borescopes to determine when parts are worn or damaged beyond acceptable tolerances.
Major Duties
*THIS IS A TITLE 32 NATIONAL GUARD POSITION THAT REQUIRES MILITARY MEMBERSHIP* This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of this position is to perform maintenance, repair, and inspection on a full range of small arms and related devices. (1) Performs overhaul, maintenance, and repair on a variety of small arms that involve numerous parts, subassemblies, adjustments, and must be adjusted to close tolerances. Diagnoses and identifies mechanical deficiencies and/or malfunctions in weapons, such as, automatic pistols, revolvers, shotguns, automatic rifles, grenade launchers, machine guns, rocket launchers, mortars, and other small arms and accessories. (2) Disassembles weapons, assemblies, subassemblies and other components.
After disassembly examines for defects, mechanical misalignment, and malfunctions. (3) Uses hand and power tools, precision gauges, test instruments, jigs and alignment devices in making repairs, modifications, and adjustments to small arms. (4) Ensures the accountability, storage, and security of arms and other sensitive items while they are kept for repair, usually in vaults with limited access. (5) May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). (6) Performs other duties as assigned. The above duty description doesn't contain all details of the official position description.
Education
No substitution of education allowed for this position.
How You Will Be Evaluated
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position.
You may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. WHO MY APPLY: AREA 1: Current permanent (Tenure 1 and 2) Federal Technicians/Employees of the Michigan National Guard and current temporary (Tenure 3 and 0) Federal Technicians/Employees of the Michigan National Guard who've held a temporary appointment with the Michigan National Guard for an accumulative 6 months within the last 12 months.
AREA 2: All current military members of the Michigan National Guard. If the applicant is a member of the other service branch they MUST willing and eligible to immediately transfer to the appropriate branch of service. IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC.
WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position.
Your rating will be based on both your entire application package as well as the responses to the assessment questionnaire. Please follow all instructions carefully. Errors or omissions may affect your eligibility.
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid work on the same basis as for paid experience. Part-time experience will be credited on the basis of time actually spent in appropriate activities. To receive credit for such experience you must indicate clearly the nature of the duties and responsibilities in each position held and the number of hours per week spent in such employment.
Your qualifications will be evaluated on the above general and specialized experience, to include following competencies- knowledge, skills, abilities (KSAs): Skill in making repairs to a variety of small arms that have parts and adjustments that are numerous and complicated. Knowledge of interrelated mechanical systems to check, repair, adjust weapons, and perform necessary work to repair or rebuild small arms is required. Mechanical skill sufficient to work on weapons and mechanical systems in disassembly for repair, inspection to diagnose mechanical malfunctioning, and to assess wear and/or damage.
Skill is also required to adjust levers, gear linkages, and synchronize interrelated mechanical systems. Broad knowledge of weapons operation to apply technical manuals, regulations, specifications and drawings in order to determine operation, assembly, tolerances and locate causes of improper functions for a variety of weapons. Skill in using precision gages and measuring instruments such as micrometers, optical comparators, ultrasonic checkers, magnafluxing machines, or borescopes to determine when parts are worn or damaged past acceptable specifications.
Additional Information
SELECTIVE SERVICE: If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). MILITARY MEMBERS WITH BONUSES:Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB) or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 180 days in any continuous 12-month period). Are advised to meet with education specialist to review contract.
NOTE: If the individual selected is currently on a Title 10 or Title 32 tour no action can be taken until he/she is released from tour.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12943818 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application.
You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package.
You will have the opportunity to upload additional documents to include in your application before it is submitted.
Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position.
Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Required Documents
To apply for this position, you must submit a complete Application Package which includes: 1.
Your resume showing: Contact Information-your name and the best way to contact you (DO NOT INCLUDE PII OR PHOTOGRAPH) For each relevant work experience, you MUST include: Job Title and Employer (including series and grade for any Federal positions) Start and end dates with month/year (e.g., 05/2019 - 08/2022) The number of hours you worked per week Ensure work experience descriptions are aligned with the job announcement and address all required qualifications. Brief descriptions should demonstrate your ability to perform the tasks at the required level as stated in the job announcement. When relevant or required for the position, include your possession of education/ certification/license and provide any required documentation such as transcripts, and/or details (type and date) of certifications and/or licenses.
If your resume does not contain this information, your application may be marked as incomplete, and you may not receive consideration for this position. For additional information see: What to include in your resume.
- Other supporting documents: Standard Form 50(SF-50), Licenses, Certificates, DD-214 SF-50: If you are currently an onboard MING Federal Technician/Employee, then you MUST submit your most recent SF-50 at time of your application submission. If you are currently or have previously been employed by another Federal Agency or previously worked for our agency, please submit a copy of the last Notification of Personnel Action (SF-50).This is NOT a requirement for those that have never been employed by a Federal Agency or those currently employed by our agency.
- Transcripts: Only a requirement if education is required OR you substitute education for specialized experience. Unofficial copies may be submitted for application purposes. To receive education credit transcripts MUST be submitted at time of application submission.
- Current Military Branch Career Data Brief: Air- Career Data Brief: can be obtained through vMPF using the following steps: Navigate to https://vmpf.us.af.mil/vMPFNet40/Hub.aspx > Login > Career Data Brief (CDB) > View CDB > Print to Microsoft PDF > Save as a PDF. Army- Soldier Talent Profile: can be obtained through IPPS-A using the following steps: Navigate to https://ipps-a.army.mil Login > PKI Login > (login with CAC) > OK > My Soldier Talent Profile > Print.
From here, you save the document as a PDF. If you are not currently serving in a Military compacity (any Branch or Service), please provide a letter of intent to join the Michigan Army National Guard. PLEASE
NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resumes, supporting documents, official transcripts (copies) if needed, licenses, SF 50 etc.) is received, accurate, and submitted by the closing date.
You may verify your documents have been processed with your application package successfully prior to the announcement closing. Uploaded documents may take up to one hour to clear the virus scan. Human Resources WILL NOT modify, change or add anything to your application packet after the closing date. Incomplete packets will not be considered for the position.