Federal
TITLE 32 ENGINEERING TECHNICIAN (MI CRTC)
Air National Guard Units ยท Department of the Air Force
About This Position
THIS IS AN AIR FORCE NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a TITLE 32 ENGINEERING TECHNICIAN (MI CRTC), Position Description Number NGD1519P01 and is part of the MI Alpena CRTC, Michigan Air National Guard.
Qualifications
In your resume you will need to address the general and specialized experience listed below. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position. Military Grades: E1 - E6 SPECIALIZED EXPERIENCE: Must have 1-year equivalent to at least next lower grade level experience, education, or training with knowledge of basic standard engineering principles, methods and practices. Experience reading and interpreting engineering and architectural plans and specifications. Experience planning, scheduling and supervising; exercising initiative and sound judgment. Experience using a variety of inspection techniques and practices to determine compliance with plans and specifications. CERTIFICATION REQUIREMENTS: Engineering technicians may be certified by the National Institute for Certification in Engineering Technologies, an organization sponsored by the National Society of Professional Engineers. Certification by the Institute will be helpful as a measure of the technician's quality of experience. MILITARY REQUIREMENT: For Dual-Status Technician positions service affiliation under Title 32 USC 709 is required. Military skill set is determined by AFSC/MOS requirements. Upon selection, individuals must be assigned to a compatible military AFSC/MOS in accordance with statutes and National Guard Bureau regulations and must obtain/maintain all requirements of the AFSC/MOS. Specific requirements are found in the references listed below, NGB Compatibility tables, and your local Personnel section.
Major Duties
***THIS IS A TITLE 32 NATIONAL GUARD POISITION THAT REQUIRES MILITARY MEMBERSHIP*** This position is located in Base Civil Engineering, Air National Guard Wing/Group Flying Activity. The primary purpose of the position is to provide technical expertise in preparing engineering plans, specifications and cost estimates. Additionally, the incumbent of this position will conduct preliminary, intermediate and final contractual inspections. These activities require application of the basic principles of engineering technology and related disciplines. Reviews engineering plans and specifications for compliance with federal and state regulations, and ensures that design formats comply with applicable guidance. Plans and specifications may be related to such engineering projects as: electrical distribution systems for office buildings, facilities and airfields; mechanical utility systems such as heating, ventilation, air conditioning; alteration, rehabilitation and modernization of buildings, structures, roads, streets, airfields and appurtenances, power and pumping plants; and other projects similar in scope and complexity. Participates in the construction planning process by investigating proposed projects to obtain field data, check existing facilities and utilities, if any, and to conceptualize the scope of the completed project. Develops and produces engineering specifications and cost estimates using specification guides, engineering handbooks, building construction cost data, manufacturers publications, engineering standards for types of materials, fire and safety codes, and other published material. Applies knowledge of construction and maintenance practices, estimating, and short cut methods of construction and installation, to provide cost estimates. Furnishes sketches and layouts supplemented by verbal or written information for preparation of drawings. Considers design from standpoint of structural quality, resistance to environmental elements, use, and suitability to equipment and needs. Prepares modification/alteration design specifications considering existing structures, utilities, facilities and other considerations of projects that are not readily apparent. Considers the structural soundness of existing facilities and adequacy of systems to accommodate proposed changes. Applies a practical knowledge of engineering methods, techniques, architecture, and historical project data to ensure project requirements are complete. Coordinates with professional engineers, field specialists, safety personnel and journeyman craftsmen to develop specifications and drawings and to provide complete documents which include labor and material estimates. Conducts construction inspections to ensure contractor compliance with engineering plans, specifications, contractual obligations, and governing laws and regulations. The above duty description doesn't contain all details of the official position description.
Education
To qualify using the Education requirement for substituting specialized experience you must meet the below criteria: Two full years of graduate education or a master's degree meets the requirements for GS-9. You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
How You Will Be Evaluated
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. Resume MUST include the following: Job Title Job title Duties (be as detailed as possible) Employer's name and address Supervisor's name and contact information Month & year start/end dates (e.g. June 2007 to April 2008) Full-time or part-time status (include hours worked per week) Series and Grade, if applicable, for all Federal positions you have held Area of Consideration Explanation: Area 1: Current Federal Technicians of the Michigan National Guard Area 2: Current military member of the Michigan National Guard. Area 3: Open to all applicants who are willing and eligible to join Michigan National Guard.
Additional Information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12805653 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Required Documents
To apply for this position, you must submit a complete Application Package which includes: 1. Your resume showing work schedule, hours worked per week, start and end dates (format must include Month and Year; MM/YY - MM/YY) of employment and a full, complete explanation of job experiences. 2. Other supporting documents: DD214 (Optional) SF 50 (Optional) Transcripts (Optional) Certifications (REQUIRED) SRB / DVB (RECOMMENDED)
Frequently Asked Questions
What is the salary for the TITLE 32 ENGINEERING TECHNICIAN (MI CRTC) position at Air National Guard Units?
The salary range for this position is $61,722 - $80,243/yr. This is a GS-9 position on the General Schedule pay scale. Actual pay may vary based on locality adjustments.
Where is the TITLE 32 ENGINEERING TECHNICIAN (MI CRTC) job located?
This position is located in Alpena, Michigan. This is an on-site position.
What qualifications do I need?
In your resume you will need to address the general and specialized experience listed below. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position. Military Grades: E1 - E6 SPECIALIZED ...
How do I apply for this position?
Apply through USAJobs.gov by clicking the 'Apply on USAJobs' button. You'll need a USAJobs account, a federal-style resume, and supporting documents. The deadline is Feb 25, 2026.
Is a security clearance required?
No security clearance is required for this position.
What does GS-9 mean?
GS-9 refers to the General Schedule grade level. Higher grades require more experience and offer higher pay. Visit our GS Pay Scale page for full salary tables by grade and locality.
What benefits do federal employees receive?
Federal employees receive comprehensive benefits including health insurance (FEHB), retirement through FERS, Thrift Savings Plan (TSP) with government matching, paid annual and sick leave, paid parental leave, life insurance, and student loan repayment programs.