Federal

SURFACE MAINTENANCE MECHANIC INSPECTOR

Army National Guard Units ยท Department of the Army
๐Ÿ“ Ayer, Massachusetts WG-12 $42 - $49/hr
Posted: Mar 30, 2026 Deadline: Apr 14, 2026 (Closes in 10 days days left)

About This Position

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a SURFACE MAINTENANCE MECHANIC INSPECTOR, Position Description Number PDD1286000 and is part of the MA ARNG CSMS, National Guard. This is a Bargaining Unit position. The unit point of contact and contact phone for this position is: CW5 John Crosier at 339-202-4601

Qualifications

Military Grades: ENL: SFC to SGM WO: WOC to CW2 Compatible Military Assignments: MOS: 25, 26, 51, 88, 89, 91, 92 *All applications will be considered regardless of Branch MOS* AREA OF CONSIDERATION: Open to current members of the Massachusetts Army National Guard, and members of the National Guard of another state that are eligible to transfer to the Massachusetts Army National Guard. National Guard Membership IS required for this announcement. NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard.

Selectee will be required to wear the military uniform. Acceptance of an excepted service position Constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement.

If you are not sure you are eligible for military membership, please contact a Massachusetts Army National Guard recruiter prior to applying for this position. GENERAL EXPERIENCE: Must have experience or training, which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and is able to use common tools and equipment in the line of work. SPECIALIZED EXPERIENCE: Must have at least 18 months Experience or training leading to an extensive knowledge of the mechanical makeup, operation, and working relationships of complex interconnecting systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment.

Ability to diagnose, repair, overhaul, and modify interconnected complex systems on a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Extensive knowledge of state of the art electrical, electronic, complex hydraulic, pneumatic, and other major non-mechanical systems that have a functional relationship and effect on the operation of major mechanical systems. Extensive knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls.

Skill and knowledge to develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines (such as modifying parts to fit and mesh into systems for which the parts were not designed); improvise modifications to equipment to correct recurring malfunctions; and design modifications to meet special test requirements or other special needs. PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work.

You must clearly identify the duties and responsibilities in each position held and the total number of months/years. VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment.

You will receive credit for all qualifying experience, including volunteer experience.

Major Duties

(1) Inspects a large variety of heavy-duty mobile equipment, combat, tactical and automotive vehicles such as attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc. May also inspect heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity. (2) Inspects complex, interrelated mechanical, hydraulic, pneumatic, electronic and electrical systems, equipment and their components while in operation or in a standby condition. Inspects and performs tests to braking, steering, and differential systems, which are mechanically integrated with the transmission; to large engines that directly power multiple hydraulic and pneumatic systems; to intricate fuel injection systems; to turret stabilization systems; and to other systems combined in a single, complex mechanical assembly.

Uses specially designed testing methods and test equipment such as computerized test sets, precision gauges, electronic sensors, injector test stands, engine scopes, etc., to assure that tolerance and safety factors have been met. (3) Inspects equipment to determine repairs needed. Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s). Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical.

Recommends to a higher echelon to condemn equipment when the repair cost exceeds the established MEL. Prepares lists of needed repairs, parts, and man-hours authorized. Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements.

Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs. (4) Inspects the full range of equipment as described above at remote worksites in support of field organizations, field units during field exercise training periods, or before major pieces of equipment are sent for repair to a supporting maintenance facility. Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT). (5) Performs other duties as assigned.

How You Will Be Evaluated

Please follow all instructions carefully. Errors or omissions may affect your eligibility. Once the application process is complete, a review of resume and supporting documentation will be made and compared against your responses to the assessment questionnaire to determine if you are qualified for this job. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

Additional Information

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). MILITARY INCENTIVES - BONUSES AND STUDENT LOAN REPAYMENT PROGRAM: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and Student Loan Repayment Program incentives. In order to avoid losing your incentive eligibility, you should check with your incentives manager prior to accepting an offer for the position.

For M-Day/Traditional personnel who are currently receiving incentives to include Bonuses and the Student Loan Repayment Program incentive, the following termination rule applies: Incentive Termination without Recoupment: If you accept an Active Guard Reserve (AGR) position or a Military Technician (Mil Tech) Permanent or Indefinite position after 25 February 2010 where membership in the National Guard is a condition of employment, your bonus will be terminated with no recoupment. Fair Chance to Compete for Jobs Act of 2019 An employee of an agency may not request, in oral or written form, that an applicant for an appointment to a position in the civil service disclose criminal history record information regarding the applicant before the appointing authority extends a conditional offer to the applicant. An applicant may submit a complaint, or any other information, to an agency within 30 calendar days of the date of the alleged non-compliance by an employee of an agency.

To file a complaint please click this link and scroll to the bottom of the page for more information.

How to Apply

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12922744 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application.

You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package.

IMPORTANT: Your resume cannot exceed 2 pages.

You will have the opportunity to upload additional documents to include in your application before it is submitted.

Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position.

Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Required Documents

Resume must be submitted with the following information: Your name and contact information. Work Experience section of your resume must include: Name of the organization you worked at. Job title you held at the organization. Start and end dates for the position (dates must have month and year). Bulleted statements regarding duties you performed in the position. Be clear and concise in stating your duties, we will not make any assumptions regarding your experience.

Your bulleted statements should reflect that you have the required specialized experience described in this announcement. If your position was in the civil service, include the grade and series for the position. If applicable, include TRADITIONAL GUARDSMEN experience.

Enter your MOS, bulleted statements of duties, and start and end dates (dates must have month and year). Education and certificates if applicable. Include name of school, degree, or certificate, start and end dates.

Part-Time, unpaid, volunteer work if applicable. Include duties and responsibilities and start and end dates (dates must have month and year).

IMPORTANT: Resumes that exceed 2 pages cannot be considered. For additional information regarding resume requirements visit: https://help.usajobs.gov/faq/application/documents/resume/page-limit

Frequently Asked Questions

What is the salary for the SURFACE MAINTENANCE MECHANIC INSPECTOR position at Army National Guard Units?
The salary range for this position is $42 - $49/hr. This is a WG-12 position on the General Schedule pay scale. Actual pay may vary based on locality adjustments.
Where is the SURFACE MAINTENANCE MECHANIC INSPECTOR job located?
This position is located in Ayer, Massachusetts. This is an on-site position.
What qualifications do I need?
Military Grades: ENL: SFC to SGM WO: WOC to CW2 Compatible Military Assignments: MOS: 25, 26, 51, 88, 89, 91, 92 *All applications will be considered regardless of Branch MOS* AREA OF CONSIDERATION: Open to current members of the Massachusetts Army National Guard, and members of the National Guard of another state that are eligible to transfer t...
How do I apply for this position?
Apply through USAJobs.gov by clicking the 'Apply on USAJobs' button. You'll need a USAJobs account, a federal-style resume, and supporting documents. The deadline is Apr 14, 2026.
Is a security clearance required?
No security clearance is required for this position.
What does WG-12 mean?
WG-12 refers to the General Schedule grade level. Higher grades require more experience and offer higher pay. Visit our GS Pay Scale page for full salary tables by grade and locality.
What benefits do federal employees receive?
Federal employees receive comprehensive benefits including health insurance (FEHB), retirement through FERS, Thrift Savings Plan (TSP) with government matching, paid annual and sick leave, paid parental leave, life insurance, and student loan repayment programs.