Federal

SURFACE MAINTENANCE MECHANIC

Army National Guard Units ยท Department of the Army
๐Ÿ“ Bogalusa, Louisiana WG-10 $28 - $33/hr
Posted: Feb 12, 2026 Deadline: Mar 4, 2026 (Closes in 17 days days left)

About This Position

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. DEFINITION OF AREA(S) OF CONSIDERATION: Area 1 = All On-Board technicians currently employed within the Louisiana Army National Guard.

Qualifications

GENERAL EXPERIENCE: Must possess experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work. SPECIALIZED EXPERIENCE: Must possess at least Twenty-Four (24) months of experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment; ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment; knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems; knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls; basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards; ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control system. CONDITIONS OF EMPLOYMENT & NOTES: 1. Must be able to obtain and maintain the appropriate security clearance of the position. 2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. 3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. 4.Irregular and/or overtime compensatory hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day. 5. The work may require the employee to drive a motor vehicle. An appropriate, valid driver's license may be required for the position. 6.Utilizes safety practices and procedures following established safety rules and regulations to maintain a safe and clean work environment. 7. This is a dual-status T32 position and requires military membership.

Major Duties

Duties & Responsibilities: (1) Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. This may include self-propelled artillery, tracked cargo and personnel carriers, road graders, mobile cranes, front loaders, conveyors, bulldozers, power shovels, compressors, generators, tanks, tracked combat vehicles, sedans, buses, all terrain vehicles, trucks, semi trailers, forklifts, tractors, and accessory equipment. Troubleshoots, repairs and overhauls major systems to include internal combustion engines, turbine engines, automatic and non-automatic transmissions, heavy duty drive line systems, and hydraulic utility systems and controls. Makes repairs to assemblies and components such as voltage regulators, generators/alternators, brake cylinders, etc. Performs work in accordance with modification work orders, technical manuals, lubrication orders, maintenance bulletins, regulations or management policies. May repair a variety of more complex major systems to include engines, cross drive or similar multi-system transmissions and a variety of intricate fuel injection systems. (2) Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Utilizes embedded diagnostics in equipment and a wide variety of original equipment manufacturer system analyzers in order to determine the exact nature or extent of repair. Determines what adjustments may be necessary to complete work orders, and whether any additional repairs other than those specified or indicated on the work order are necessary. (3) Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Makes the appropriate repairs, overhaul, or modifications in accordance with the proper repair specifications and procedures. Reassembles engines and other systems, and adjusts, tests, and reinstalls in vehicles and equipment as necessary. Makes adjustments and repairs to electrical and suspension systems. May install pistons, sleeves, rings, bearings, rods, crankshafts, timing gears, and rocker arms. May be required to perform fuel injection equipment repair, overhaul, rebuild, and calibration duties utilizing a variety of complex test and calibration equipment. (4) Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Provides technical guidance and specialized team leadership to lower grade employees within the team. Assists lower grade mechanics in performing major repair work. May provide Field and limited Sustainment maintenance at unit locations as part of a "contact team." Recovers and evacuates inoperable vehicles from the unit location of breakdown. (5) Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. Performs operational inspections and ensures vehicles and equipment are properly serviced, including brake adjustments, replacing hydraulic fluids, greasing, cleaning, etc., and performs other preventive maintenance operations as required. Inspects supported equipment prior to use during Inactive Duty Training (IDT) and Annual Training (AT), to ensure that it is functioning properly. May inspect in-process repair work of lower graded repairer to ensure equipment is being repaired in accordance with pertinent requirements. May serve as a commodity inspector during Command Maintenance Management evaluations (COMET) or as a member of a Maintenance Assistance Instruction Team (MAIT). Instructs operator/crew in the maintenance of equipment and provides technical advice and assistance to supported units when requested. (6) May maintain and repair electronics communication equipment by removing and replacing components and elements. Equipment includes such items as radios, field telephones, amplifiers, switchboards, recorders, intercoms. (7) Assists in the maintenance of production reports and records, and makes recommendations to the supervisor. Plans, organizes, and performs technical analyses as required or assigned. Makes recommendations to the supervisor as to adjustments necessary to effectively, efficiently and economically accomplish the work and maximize production. (8) Performs other as duties as assigned.

Conditions of Employment

THIS IS AN "OBLIGATED" POSITION DUE TO FORMER INCUMBENT ACCEPTING A TITLE 32 USC ACTIVE GUARD/RESERVE TOUR. SHOULD RESTORATION RIGHTS BE EXERCISED, PRESENT INCUMBENT WILL BE SEPARATED AS A MILITARY TECHNICIAN. THE INCUMBENT WILL BE ENTITLED TO ALL LEAVE AND INSURANCE COVERAGE AS A PERMANENT EMPLOYEE AND COVERAGE IN THE FEDERAL EMPLOYEE RETIREMENT SYSTEM (FERS)/FEDERAL EMPLOYEE RETIREMENT SYSTEM-REVISED ANNUITY EMPLOYEES (FERS-RAE)/FEDERAL EMPLOYEES RETIREMENT SYSTEM - FURTHER REVISED ANNUITY EMPLOYEES - FERS (FRAE) RT. IF FORMER INCUMBENT DOES NOT EXERCISE RESTORATION RIGHTS AFTER FIVE (5) YEARS FROM THE TOUR BEGINNING EFFECTIVE DATE, POSITION WILL BECOME PERMANENT. 1) National Guard Membership is required. 2) Males born after 31 December 1959 must be registered for Selective Service. 3) Federal employment suitability as determined by a background investigation. 4) May be required to successfully complete a probationary period. 5) Must be current on-board technician employed by the Louisiana National Guard. MILITARY REQUIREMENTS: WARRANT OFFICER (CW3 & BELOW) & ENLISTED SECURITY CLEARANCE: Must maintain appropriate level of security clearance. ***LOUISIANA NATIONAL GUARD MEMBERS - Acceptance of this position may result in the loss of contracted incentive(s). For further details, contact the LANG State Incentive Manager, at (504) 278-8116 (ARMY) 391-8336 (AIR FORCE). *** NOTICE: THIS EMPLOYER PARTICIPATES IN E-VERIFY: FEDERAL LAW REQUIRED ALL EMPLOYERS TO VERIFY THE IDENTITY AND EMPLOYMENT ELIGIBILITY OF ALL PERSONS HIRED TO WORK IN THE UNITED STATES. NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Participation in direct deposit is mandatory.

Education

You must provide transcripts and/or other documentation as proof to support your Educational claims, and receive credit to meet the Education requirements for this position.

How You Will Be Evaluated

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): Ability to Interpret Instructions, Specification, etc. (includes blueprint reading) and Ability To Use and Maintain Tools and Equipment

Additional Information

As a condition of employment for accepting this position, you will be required to serve a 2-year trial period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: - your performance and conduct; - the needs and interests of the agency; - whether your continued employment would advance organizational goals of the agency or the Government; and - whether your continued employment would advance the efficiency of the Federal service. Upon completion of your trial period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). Payment of Permanent Change of Station (PCS) costs is not authorized, based upon a determination that a PCS move is not in the Government interest. This is a bargaining unit position.

How to Apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume, application packet, and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Required Documents

To apply for this position, you must submit a complete Application Package which includes: 1. Your resume showing work schedule, hours worked per week, dates of employment and duties performed. 2. Application Packet (Click Link To Download) and submit other supporting documents. 3. OF 612 - "Optional Application for Federal Employment" (Click Link to Download) Submit only if you do not have a resume. 4. Security Clearance Form (Please complete this form and submit if you do not have at least a "SECRET" security clearance.)

Frequently Asked Questions

What is the salary for the SURFACE MAINTENANCE MECHANIC position at Army National Guard Units?
The salary range for this position is $28 - $33/hr. This is a WG-10 position on the General Schedule pay scale. Actual pay may vary based on locality adjustments.
Where is the SURFACE MAINTENANCE MECHANIC job located?
This position is located in Bogalusa, Louisiana. This is an on-site position.
What qualifications do I need?
GENERAL EXPERIENCE: Must possess experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work. SPECIALIZED EXPERIENCE: Must possess at least Twenty-Four (24) months of experience or training leading to a thorough k...
How do I apply for this position?
Apply through USAJobs.gov by clicking the 'Apply on USAJobs' button. You'll need a USAJobs account, a federal-style resume, and supporting documents. The deadline is Mar 4, 2026.
Is a security clearance required?
Yes, a Secret clearance is required.
What does WG-10 mean?
WG-10 refers to the General Schedule grade level. Higher grades require more experience and offer higher pay. Visit our GS Pay Scale page for full salary tables by grade and locality.
What benefits do federal employees receive?
Federal employees receive comprehensive benefits including health insurance (FEHB), retirement through FERS, Thrift Savings Plan (TSP) with government matching, paid annual and sick leave, paid parental leave, life insurance, and student loan repayment programs.