Military

POWERED SUPPORT SYSTEMS MECHANIC (SMALL SHOP CHIEF)

Army National Guard Units ยท Department of the Army
๐Ÿ“ Davenport, Iowa WG-11 $33 - $39/hr
Posted: May 7, 2026 Deadline: May 21, 2026 (Closes in 2 days)

About This Position

IOWA ARMY NATIONAL GUARD - TITLE 32 EXCEPTED SERVICE POSITION This position is restricted to current Military members of the Iowa Army National Guard. LOCATION: AASF 3, Davenport, IA

Qualifications

In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Applicants who do not fully address the minimum/specialized experience needed for the position in their resume will not be referred for consideration.

MINIMUM REQUIREMENTS: Experience or training which demonstrates the knowledge of mechanical maintenance work; ability to read and use technical manuals, illustrations, diagrams and schematics, and skill in the use of equipment and hand tools used in troubleshooting, testing, and repairing equipment. SPECIALIZED EXPERIENCE REQUIREMENTS: WG-5378-11: Must have experience in the following: Experience or training removing, adjusting, replacing, cleaning, and installing parts, components, and accessories. Experience which provided working knowledge of mechanical, electrical, and hydraulic theory applying to powered support equipment and systems; and skill to replace, fit, install, and make adjustments.

Experience which provided working knowledge of the makeup and operation of the various individual systems maintained and their interrelationships. Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics.

Major Duties

As a POWERED SUPPORT SYSTEMS MECHANIC (SMALL SHOP CHIEF), WG-5378-11 your duties are below. Serves as a Small Shop Chief performing all of the following tasks: Plans and lays out work to be accomplished in the shop which is then completed by the individual and lower graded worker(s). Possesses the knowledge and skills found at the journeyman level as well as those required for planning, accomplishing and maintaining a functional shop maintenance program.

Independently determines appropriate maintenance procedures such as how and when the work should be accomplished. Estimates manpower, equipment and material requirements. Devises and maintains all program plans and records, is skilled in surveillance and troubleshooting techniques, and is able to determine maintenance/repair procedures needed without benefit of technical supervisory guidance.

Plans, organizes and directs shop maintenance programs/procedures under general supervision. Determines approaches, methods and courses of action required to accomplish the mission of the shop in an effective and efficient manner. May provide recommendations and input to the supervisor concerning personnel actions such as performance appraisals, awards, position description changes, disciplinary actions, leave, etc.

Performs the same type and level of work as performed within the unit. Implements safety regulatory requirements. Ensures that other workers in the shop wear appropriate safety equipment and follow pertinent safety precautions.

Participates in various types of readiness preparations, inspections, evaluations, and mobilization and command support exercises. Performs additional duties such as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operation, maintenance of facilities and equipment. May serve as a member of a team to cope with natural disasters or civil emergencies.

Performs other duties as assigned. D1278000

Conditions of Employment

NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted position that requires military membership in a compatible military assignment in the Iowa Army National Guard. Selectee will be required to wear the military uniform. Acceptance of this excepted position constitutes concurrence with these requirements as a condition of employment.

APPLICATION MATERIALS MUST BE RECEIVED BY 05/21/2026 . FAILURE TO PROVIDE COMPLETE INFORMATION MAY RESULT IN YOUR NOT RECEIVING CONSIDERATION FOR THIS POSITION. Please refer to the Qualifications and Evaluations Section of this Announcement to understand the qualification requirements, and the How to Apply Section for detailed instruction on applying.

TRIAL PERIOD REQUIREMENT: As a condition of employment for accepting this position, you will be required to serve a 2-year trial period or 1-year (Veterans Preference Eligibles Only) during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: Your performance and conduct. The needs and interests of the agency.

Whether your continued employment would advance organizational goals of the agency or the Government; and Whether your continued employment would advance the efficiency of the Federal service. Upon completion of your trial period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. SECURITY CLEARANCE REQUIREMENT: Employment is subject to attaining and maintaining a clearance as required by this position.

If the selectee does not possess the applicable security clearance when hired, application must be made within 30 days of the start date. Failure to make application for the required security clearance will result in termination of employment. Failure to complete prescribed courses may be cause for reassignment or termination of FTS.

Military Rank Requirements: ENLISTED MEMBERS (E-5 to E-8)

How You Will Be Evaluated

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration. Knowledge, Skills and Abilities required for this position: Ability to plan and accomplish a functional shop maintenance program is essential Skill in surveillance and troubleshooting techniques

Additional Information

ENLISTMENT CASH BONUSES: Acceptance of a technician position may affect any bonus and/or educational assistance that may be applicable. Please contact your Education Office prior to accepting a position with the Iowa Army National Guard. Participation in direct deposit is mandatory. If you are a male applicant born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).

How to Apply

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application.

You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package.

You will have the opportunity to upload additional documents to include in your application before it is submitted.

Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position.

Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

Required Documents

To apply for this position, you must submit a complete Application Package which includes: Your resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed. Additional Supporting Documents (if applicable): Cover Letter, Transcripts, DD 214, SF-50, ect.

Frequently Asked Questions

What is the salary for the POWERED SUPPORT SYSTEMS MECHANIC (SMALL SHOP CHIEF) position at Army National Guard Units?
The salary range for this position is $33 - $39/hr. This is a WG-11 position on the General Schedule pay scale. Actual pay may vary based on locality adjustments.
Where is the POWERED SUPPORT SYSTEMS MECHANIC (SMALL SHOP CHIEF) job located?
This position is located in Davenport, Iowa. This is an on-site position.
What qualifications do I need?
In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Applicants who do not fully address the minimum/specialized experience needed for the position in their resume will not be referred for consideration. MINIMUM REQUIREMENTS: Experience or training which demonstrates the knowledge of mechanical maintenance work; ability to read and use technical manuals, illustrations, diagrams and schematics, and skill in the use of equipment and hand tools used in troubleshooting, testing, and repairing equipment. SPECIALIZED EXPERIENCE REQUIREMENTS: WG-5378-11: Must have experience in the following: Experience or training removing, adjusting, replacing, cleaning, and installing parts, components, and accessories. Experience which provided working knowledge of mechanical, electrical, and hydraulic theory applying to powered support equipment and systems; and skill to replace, fit, install, and make adjustments. Experience which provided working knowledge of the makeup and operation of the various individual systems maintained and their interrelationships. Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics.
How do I apply for this position?
Apply through USAJobs.gov by clicking the 'Apply on USAJobs' button. You'll need a USAJobs account, a federal-style resume, and supporting documents. The deadline is May 21, 2026.
Is a security clearance required?
Yes, a Secret clearance is required.
What benefits do federal employees receive?
Federal employees receive comprehensive benefits including health insurance (FEHB), retirement through FERS, Thrift Savings Plan (TSP) with government matching, paid annual and sick leave, paid parental leave, life insurance, and student loan repayment programs.