MOBILE EQUIPMENT METAL WORKER (Title 32)

(1) Disassembles damaged mobile equipment bodies and components to determine nature and extent of damage and required repairs. Performs repair work on damaged equipment components such as fenders, panels, hoods, cowls, truck beds and associated parts such as brackets, covers, clamps, and braces. Repairs bodies by mending, replacing, or fabricating with sheet metals.

On occasion, repairs damaged main frames and structural components such as doorposts, doorframes, skeletal framework, and main support members. (2) Fabricates, assembles, and installs a variety of components made of sheet metal for buses, trailers, shelters, and other equipment. Lays out and cuts materials allowing for seams, joints, laps, and shrinkage. Bends and forms metal parts into desired shapes with hand and power tools and equipment.

Uses equipment such as shears, brakes, folders, formers, crimping, burring, and bending machines. Assembles and fastens fabricated parts by installing bolts, rivets, screws, soldering, and welding. Repairs folds, wrinkles, creases, and large tears in fenders, doors, and roofs using hammers, dolly blocks, spoons, bending irons, mallets, sanders, grinders, files and hydraulic jacks.

Prepares surfaces for painting by filling and sanding. (3) Removes and replaces damaged fenders, quarter panels, and top panels by cutting and welding with oxyacetylene and electric arc welding equipment. Shrinks and stretches sheet metal to obtain desired shape and fit. Removes and replaces body trim, hardware, windshields, door glass, headliners, and other body components. (4) Repairs radiators, fuel tanks, and similar items by straightening, soldering, patching, tube rodding and splicing, plugging core sections, replacing cores and pressure testing for leaks.

Removes, disassembles, reassembles, and installs radiators, fuel tanks and similar items. (5) Occasionally performs electrical repair work such as removing, splicing, insulating, soldering, and replacing cut or defective wiring on mobile equipment. (6) Performs other duties as assigned.

NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position. Compatible military grade and assignment required prior to the effective date of placement.

This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard. Applicants who are not currently a member of the National Guard must be eligible for immediate membership in the military grade listed below. Selectee will be required to wear the military uniform.

Military Grades: Enlisted Minimum Grade - E1/PVT Maximum Grade - E8/MGT Compatible Military Assignments: Selectee must be a member of the Arkansas Army National Guard. IMPORTANT NOTES (AS APPLICABLE): Upon selection for this position, individual must possess or initiate a National Agency Check with Inquiries (NACI) background investigation. A favorable determination based upon investigative results is mandatory for this position.

Failure to meet these requirements will result in termination of employment. A pre-placement physical is required if not already current. Upon selection, must complete mandatory Full-Time Support (FTS) Training at the Professional Education Center (PEC) within six months of assignment (if applicable, training will be coordinated by the supervisor).

Individual must meet all military requirements of the position without creating a grade inversion, as determined by the Human Resources Office (HRO). Technicians will not be militarily senior to their full-time supervisor or wage leader (Grade Inversion). Enlisted members currently at a higher grade than allowed by the position (see Military Grade Requirement above) may apply; however, they must administratively reduce prior to appointment and provide confirmation of the reduction to HRO.

ADDITIONAL REQUIREMENTS ARE LISTED UNDER ADDITIONAL INFORMATION

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position.

If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the above general and specialized experience, to include following competencies- knowledge, skills, abilities (KSAs): Ability to determine the methods, equipment, materials, and techniques required to repair damaged mobile equipment bodies and metal body components parts or provide replacements. Knowledge of metal body construction to determine the extent of damage and how various components and parts are installed, i.e., bolted, soldered, riveted or welded. Ability to apply body filler to build up depressed areas, and the skill to smooth by grinding and sanding, until the contour is uniform with adjoining areas.

Ability to apply primer paint with brush or spray gun equipment. Skill in using hammers, dolly blocks, spoons, bending irons, mallets, sanders, grinders, files and hydraulic jacks to remove dents and creases in mobile equipment body components. Skill in the using sheet metal working equipment to cut, bend, form, and shape materials.

Skill in using oxyacetylene and electric arc welding equipment to cut, weld, remove or replace damaged fenders, quarter panels, and top panels. Knowledge of basic electricity to remove, splice, insulate, solder, replace, or cut defective wiring on mobile equipment. Knowledge of arithmetic to calculate and scribe patterns in the fabrication of wood or metal parts.

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). ADDITIONAL REQUIREMENTS/CONDITIONS OF EMPLOYMENT: Males born after 31 December 1959 must be registered for Selective Service. Federal employment suitability as determined by a background investigation.

May be required to successfully complete a probationary period. Participation in direct deposit is mandatory. Must be able to obtain/maintain appropriate security clearance This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968.

An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.

The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission. For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license for the state in which they live or are principally employed.

To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application.

You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package.

You will have the opportunity to upload additional documents to include in your application before it is submitted.

Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position.

Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

To apply for this position, you must submit a complete Application Package which includes: 1. Resume: showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed. DO NOT COPY THE GENERAL, SPECIALIZED EXPERIENCE, KSAs AND DUTIES WORD FOR WORD AND PLACE INTO YOUR RESUME; YOU MUST DESCRIBE YOUR PERSONAL EXPERIENCE AS IT PERTAINS TO EACH STATEMENT.

1. Current Military Branch Career Data Brief: Air- Career Data Brief: can be obtained through vMPF using the following steps: Navigate to https://vmpf.us.af.mil/vMPFNet40/Hub.aspx > Login > Career Data Brief (CDB) > View CDB > Print to Microsoft PDF > Save as a PDF. Army- Soldier Talent Profile: can be obtained through IPPS-A using the following steps: Navigate to https://ipps-a.army.mil Login > PKI Login > (login with CAC) > OK > My Soldier Talent Profile > Print.

From here, you save the document as a PDF. If you are not currently serving in a Military compacity (any Branch or Service), please provide a letter of intent to join the National Guard. Failure to provide proper documents may result in disqualification.