About This Position
This position is located in the Commander, Navy Region Mid-Atlantic, Fleet and Family Readiness Support Services Office, Facilities department. The purpose of this position is to assist with facilities maintenance work. The incumbent performs intermediate level tasks and works more independently as training and experience increase.
Qualifications
Resumes must include information which demonstrates experience and knowledge, skills, and ability (KSAs) as they relate to this position. Applicants are encouraged to be clear and specific when describing their experience level and KSAs. A qualified candidate must possess: Minimum two years working experience that demonstrates knowledge in two areas (Carpentry, Plumbing, HVAC, Electrical or Painting).
Knowledge in the applicable combination of trades sufficient to perform the duties of the position. Must have skill in the safe use of a variety of basic hand tools, portable power tools and use of small construction equipment (scaffolding, tractors, trucks, etc.). Knowledge of safety and environmental rules and regulations concerning procedures, tools, mechanical and electrified equipment, commonly used chemicals and basic safe work practices.
Must have the ability to manage multiple priorities and respond quickly and effectively to changing program needs and regulations. Must have strong interpersonal and communication skills, verbal and written skills to be able to evaluate and provide reports on work in progress. Factor
- SUPERVISORY CONTROLS Works under the direct supervision of the Assistant Maintenance Coordinator and receives general oversight and assistance for new or unusual situations from the Maintenance Leader. Work is reviewed in terms of quality, efficiency and adherence to established standards and procedures. Work is performed independently and is generally repetitive in nature. Guidance and assistance are available for unusual problems or unprecedented situations . Factor
- GUIDELINES Incumbent is expected to perform daily work on own initiative and carryout assignments in accordance with established regulations. Situations involving unfamiliar problems not covered by instructions are referred to the Leader or Supervisor for resolution. Typically, the employee uses routine instructions and work methods that are common to the trade and may be general in nature. Where available, the incumbent will rely on blueprints, manufacturer's instructions, manuals and maintenance specifications. Factor
- COMPLEXITY Due to the need to accomplish work across two or more trades, the work consists of a variety of duties requiring many different and unrelated processes and methods. Independent discretion is needed to determine how best to approach the work and which methods to apply. Factor
- SCOPE AND EFFECT The purpose of the work is to provide maintenance services. The work directly contributes to the military members, retirees, civilians, and family member's quality of life, mission readiness, and contributes to job satisfaction and retention of valuable members. Factor
- CONTACTS Contracts include regional staff, all department heads, and lodging staff. Some contact with contractors, vendors, and representatives of private industry. Factor
- PURPOSE OF CONTACTS Contacts are made to coordinate and/or obtain information relating to the maintenance operation. Factor
- PHYSICAL DEMANDS The incumbent is required to do considerable standing, bending, walking, pushing, pulling and climbing. Must have ability to perform moderately strenuous physical labor as unassisted lifting, moving, and carrying of supplies and equipment weighing up to 45 pounds (100 pounds assisted) is required. Must be able to climb/descend stairs and ladders, stoop, bend, kneel, and work in uncomfortable positions. Factor
- WORKING ENVIRONMENT The work involves normal risks or discomforts associated with plan operations, facility management, and/or mechanical systems. Work is performed both indoors and outdoors with potential exposure to extreme weather or temperature conditions. Occasional exposure to dusty or dirty conditions exists when visiting and facilities undergoing repair, maintenance or renovation. Personal Protective Equipment (PPE) is provided.
Major Duties
The incumbent is responsible for a variety of semi-skilled and unskilled tasks involved standard methods related to the operation and maintenance of facilities. Performing work in at least two of the following trades requiring a higher level of skill than the NA-4749-07 in the maintenance and repair of buildings and related fixtures or having significant emphasis in one of the higher-level licensed trades: Electrical, Heating, Ventilation and Colling or Plumbing. Maintains logs as required.
Plumbing: Makes basic plumbing repairs to sinks, faucets, commodes, tanks, urinals, P-traps, shut-off valves, cleaning, resealing, and replacing defective parts or units, installing water heaters, garbage disposals, faucets and sinks. Performs routine maintenance on washer/dryers. Incumbent refers more complex problems to the supervisor.
Heating, Ventilation and Air Conditioning (HVAC): Recognizes the cause of faulty equipment and assists making repairs on a variety of HVAC units. Electrical: Recognizes and reports electrical problems. Replaces fluorescent and incandescent ballast, blubs and tubes.
Makes repairs that can be accomplished by removing, replacing, tightening, splicing, soldering, and insulating defective wiring, controls, equipment and fixtures such as broken and bare wiring, burned out switches and relays, loose connections and fittings, damaged light fixtures and poorly operating thermostats. Carpentry: Measures, cuts and constructs or repairs wood or wood substitute items. Conducts basic carpentry repairs such as repairing or replacing screens, window and doorframes, molding and trim, and repair and replacement of drywall or similar products.
Applies general knowledge of wood, composite materials, wood substitutes, and woodworking techniques, as well as basic mathematics to plan, measure and lay out materials according to dimensional requirements and specifications. Incumbent applies standard measurements and specifications when constructing, installing, or repairing items such as frame structures, decking, partitions, shelving, doors, forms, siding and scaffolds. Painting: Preparation of areas and standard coating methods such as brushing, rolling and spraying to ensure surfaces are fully coated, protected and free from drips or runs.
Incumbent uses specifications to thin, stir and mix coating materials according to specific directions. They apply various coating materials (paints, varnishes or shellacs) with brushes, rollers, spray guns, and other related methods or techniques ensuring that the coating finish meets surface protection requirements. May assists with set-up/breakdown of events or special projects.
Observes required safety, sanitation and hazardous waste disposal rules and regulations. May operate a vehicle to transport tools and materials to work site. Performs other related duties as assigned.
Education
This position does not have a positive education requirement.
How You Will Be Evaluated
All resumes will be reviewed to determine if they meet the hiring eligibility and qualification requirements listed in this announcement, and will be rated based on the information provided in the resume to determine the level of knowledge, skills and abilities (KSAs) related to the job requirements. Using the qualifications of the position, a predetermined rating criterion of KSAs will be used for each resume. Best qualified applicants will be referred to the hiring manager. The selecting official may choose to conduct interviews.
Additional Information
Salary is dependent on experience and/or education. Executive Order 12564 requires a Federal workplace free of illegal drugs. According to the Executive Order, all Federal employees are required to remain drug free throughout their employment. Commander, Navy Installations Command is a Drug-Free Federal Workplace. The use of illegal drugs will not be tolerated, and use of or intoxication by illegal drugs will result in penalties up to and including removal from Federal Service. Some positions have special requirements. Selection may be tentative pending the completion of these requirements.
Applicants may be required to submit proof of education, participate in medical screening, drug testing, etc. All selections are contingent upon satisfactory employment reference checks. Employment is subject to successful National Agency Background Check. Occupants of this position must maintain the privacy of official work information and data and demonstrate the highest level of ethical conduct.
How to Apply
To be considered for this vacancy you must apply and complete the online questionnaire and submit the documentation specified in the Required Documents section above.
The complete application package must be submitted by 11:59 PM (EST) on 04/13/2026 to receive consideration. To begin, click Apply to access the online application.
You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. To preview the Application Questionnaire, please click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12894862 It is your responsibility to ensure your application package (resume, supporting documents, and responses to the questionnaire) is complete, accurate, and submitted by the closing date.
Additional information on how to complete the online application process and submit your online application may be found on the https://help.usastaffing.gov/Apply/index.php?title=Applicant To verify or check the status of your application, log into your USAJOBS account. Once logged in, the Welcome screen lists your applications, your application status and the date it was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status DON is an Equal Employment Opportunity Employer.
All qualified candidates will receive consideration without regard to race, color, national origin, religion, sex, age, mental or physical disability, genetic information, reprisal, marital status, political affiliation, sexual orientation, or any other non-merit factor. The DON provides reasonable accommodations to applicants with disabilities. Applicants with disabilities who believe they may require reasonable accommodation(s) should email their request to [email protected] to ensure proper consideration is given.
Required Documents
The following documents are required at the time of application: Resume Proof of education/training/licensure: provide a copy of your awarded/conferred college transcript(s) and licensure as applicable If claiming Department of Defense (DOD) Non-appropriated Fund (NAF) Business Based Action (BBA) priority consideration: provide a copy of the notice of separation If claiming Military Spouse Preference: provide a copy of the sponsor's Permanent Change of Station (PCS) orders and a marriage certificate at the time of application If claiming Veteran's Preference: provide a copy of your DD-214, Member-4 page and any supporting documentation (SF-15, V.A. disability letter, proof of service, etc.) If a current or former Federal Employee: provide a copy of your most recent Personnel Action Report (PAR) or SF-50
NOTE: Failure to provide the required documents may impact eligibility, qualifications determination. Starting May 7, 2025, non-affiliated individuals requesting access will need a REAL ID-compliant driver's license or another acceptable form of identification to access CNRMA Installations. This applies to everyone, including the following: but not all inclusive: Vendors Dependents aged 18 and older Service Providers Veterans with service-connected disabilities Contractors Visitors (includes visitors in same vehicle with CAC holder) Transportation services (taxi, limo, ride share) Agent, Assist, Aid, Care Giver Letters Au Pairs, Child Care Providers What are acceptable alternative forms of identification for base access?
If you don't have a REAL ID-compliant driver's license, you can use one of the following: U.S. passport or passport card Military ID card (Common Access Card or CAC, DoD retired ID card) Permanent resident card (Green Card) Transportation Worker Identification Credential (TWIC) Enhanced Driver's License (EDL) Other forms of identification accepted by the Department of Homeland Security How can I obtain a REAL ID-compliant license? To obtain a REAL ID-compliant license, you'll need to visit your state's driver's license agency with the following documents: Proof of identity (e.g., birth certificate, passport) Proof of Social Security number (e.g., Social Security card) Two proofs of residency (e.g., utility bills, bank statements)