About This Position
THIS IS AN INDIANA NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION This position is part of the IN 122nd Fighter Wing, Indiana National Guard under Position Description Number D2431000. If you would like the complete list of duties, please contact the POC of this announcement.
Qualifications
MILITARY GRADES: E-1 (AB) through E-5 (SSgt) COMPATIBLE MILITARY ASSIGNMENTS: **2T371** If applicant is willing to join the Indiana Air National Guard and meet the AFSC compatibility requirements, please upload your Report Individual of Personnel (RIP) to your documents on this application to determine ASVAB qualification. GENERAL EXPERIENCE: Experience or training that has provided the candidate with the skill to make repairs or the ability to assist with repairs that can be accomplished by removing, adjusting, or replacing defective or worn parts. SPECIALIZED EXPERIENCE: Experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment. Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems. Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls. Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards. Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems. **FWS POSITIONS ONLY**: Specialized Experience Requirements for NGB Federal Wage System Positions for claiming civilian job experience: Creditable experience must have been performed at least 30 consecutive days and be properly documented. Experience in the same line of work can only be credited on the basis of a regular 40-hour workweek. Hours per week MUST be documented on resume to receive any credit. PLEASE READ THIS CAREFULLY AS THE FOLLOWING HAS CHANGED Indiana National Guard (INNG) Federal Technicians will wait 36 months after being selected for a new position before applying for another position within the INNG. If you meet the requirements listed below, you will need to submit a signed Exception to Policy (ETP) memorandum with your application to be considered for the position. If you have questions about applicability, send an email explaining your situation to the HRO Staffing inbox listed below. If you are a Tenure 0 Temporary employee (your position has a not-to-exceed date), you do not need an ETP memo. If you became a new employee through a USAJobs announcement within the last 36 months, you will need an ETP memo. If you received a promotion, reassignment, or grade reduction through a USAJobs announcement within the last 36 months, you will need an ETP memo. If you require an ETP memorandum, you can download the template here: https://armyeitaas.sharepoint-mil.us/sites/NGIN-J1HR/SitePages/Technician-Staffing.aspx The memorandum will be written by you, the employee, and signed by your supervisory chain up to the Director level. Directors and Supervisors will submit the signed memorandum for final review to the HRO Staffing inbox: [email protected] The Human Resources Officer (HRO) is the final approval for all ETP waivers. If approved, the memorandum will be returned to you and then submitted with your application.
Major Duties
Repairs, adjust, overhauls, performs major repairs, and maintenance on military and commercial designed heavy mobile equipment and special purpose vehicles.
Performs body repair and corrosion control, refinishes and repaints surfaces as required.
Prepares, maintains and submits applicable maintenance work orders for man-hour and data collection accounting, to include completing forms to reflect work performed or delayed and parts and maintenance required.
Participates as OJT Instructor in the vehicle maintenance area.
Assists in conducting the local occupational safety and health training program, to include compliance with directives and procedures for proper disposal of hazardous waste products within the functional area.
Performs other duties as assigned.
Performs body repair and corrosion control, refinishes and repaints surfaces as required.
Prepares, maintains and submits applicable maintenance work orders for man-hour and data collection accounting, to include completing forms to reflect work performed or delayed and parts and maintenance required.
Participates as OJT Instructor in the vehicle maintenance area.
Assists in conducting the local occupational safety and health training program, to include compliance with directives and procedures for proper disposal of hazardous waste products within the functional area.
Performs other duties as assigned.
How You Will Be Evaluated
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities, and other characteristics):
Additional Information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). This announcement follows the Fair Chance Act (FCA). The FCA prohibits specific inquiries regarding an applicant's criminal or credit background prior to the hiring agency making a conditional offer of employment to the applicant. If applicant suspects a violation to FCA for their application, the applicant may submit a complaint to the agency within 30 calendar days to the date of alleged non-compliance. To complete the complaint, applicant must send an email to [email protected] with the following information: Name of the applicant. A copy of the vacancy announcement and/or vacancy announcement number. Name of the individual(s) who allegedly violated the Fair Chance Act. A description of the violation. Supporting documentation (e.g., emails), if applicable. Exemptions to FCA implementation that may apply: Position requires a determination of eligibility for access to classified information. Is a dual-status military technician position in which an applicant or employee is subject to a determination of eligibility for acceptance or retention in the armed forces, in connection with concurrent military membership.
How to Apply
To apply for this position, you must complete the online application / Occupational Questionnaire and submit the documentation specified in the Required Documents section. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12873968
Required Documents
To apply for this position, you must submit a complete Application Package which includes: 1. Your resume showing work schedule, hours worked per week, dates (including Month and Year) of employment and duties performed. Resume submitted is limited to a length to 2 pages and the present longform Federal resume is not accepted. 2. Other supporting documents if required and/or applicable: DD-214, SF-50, Transcripts, etc... *If your application package includes a personal photograph, you will not be considered for the position.
Frequently Asked Questions
What is the salary for the HEAVY MOBILE EQUIPMENT MECHANIC position at Air National Guard Units?
The salary range for this position is $32 - $37/hr. This is a WG-10 position on the General Schedule pay scale. Actual pay may vary based on locality adjustments.
Where is the HEAVY MOBILE EQUIPMENT MECHANIC job located?
This position is located in Fort Wayne, Indiana. This is an on-site position.
What qualifications do I need?
MILITARY GRADES: E-1 (AB) through E-5 (SSgt) COMPATIBLE MILITARY ASSIGNMENTS: **2T371** If applicant is willing to join the Indiana Air National Guard and meet the AFSC compatibility requirements, please upload your Report Individual of Personnel (RIP) to your documents on this application to determine ASVAB qualification. GENERAL EXPERIENCE: Ex...
How do I apply for this position?
Apply through USAJobs.gov by clicking the 'Apply on USAJobs' button. You'll need a USAJobs account, a federal-style resume, and supporting documents. The deadline is Feb 12, 2026.
Is a security clearance required?
Yes, a Secret clearance is required.
What does WG-10 mean?
WG-10 refers to the General Schedule grade level. Higher grades require more experience and offer higher pay. Visit our GS Pay Scale page for full salary tables by grade and locality.
What benefits do federal employees receive?
Federal employees receive comprehensive benefits including health insurance (FEHB), retirement through FERS, Thrift Savings Plan (TSP) with government matching, paid annual and sick leave, paid parental leave, life insurance, and student loan repayment programs.