Federal
General Engineer (Inspector) - DIRECT HIRE
Pipeline and Hazardous Materials Safety Administration · Department of Transportation
About This Position
The primary purpose of this position is the performance of Federal pipeline safety compliance inspections; evaluate intrastate and interstate pipeline operators subject to Federal authority; investigate pipeline failures; and represent the Office of Pipeline Safety in all matter related to pipeline safety before Federal, state and industry authorities.
Qualifications
To meet the minimum qualifications for this position, you must meet either the education specialized experience requirements for the grade at which you are requesting consideration. To qualify for the GS-11 on Experience, you must have at least one year of experience equal or equivalent to the GS-09 it must include: Experience creating or reviewing engineering design and/or construction proposals/specifications for compliance with procedural, regulatory or related requirements. To qualify for the GS-11 on Education alone, you must have: 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree. You can also qualify based on a combination of higher level graduate education and experience. This must be fully supported by your resume and transcripts, provided with your application. To qualify for the GS-12 on Experience, you must have at least one year of experience equal or equivalent to the GS-11 it must include:' Experience applying engineering concepts, principles, and practices applicable to duties concerned with the design, and construction of gas or liquid pipeline systems of operators. You cannot qualify on education at the GS-12 level; you must have experience. To qualify for the GS-13 on Experience, you must have at least one year of experience equal or equivalent to the GS-11 it must include: Experience conducting safety program reviews, engineering analyses, and evaluations of natural gas or hazardous liquid pipelines in accordance with safety regulations. Experience reviewing design specifications for pipeline systems. Experience providing technical determinations, and resolutions of compliance issues arising from pipeline safety inspections. You cannot qualify on education at the GS-13 level; you must have experience. KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas: Compliance Inspection: Ability to direct an enforcement program in order to determine probable violations, assess preliminary civil penalties, issue proposed compliance orders, issue corrective action order, act as a senior official at enforcement hearings, evaluate response material, recommend final enforcement actions and issue warning letters. Technical Competence: Skill in assuring that field actions comply with national policies, objectives, and regulations, as well as ensuring those regional programs are compatible with environmental, social, and economic goals and needs. General Engineering: Knowledge of the concepts, principles, and theories of engineering and their practical applications. For all types of consideration, experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience For additional information about applying to Federal positions, please click on the following link: https://www.opm.gov/frequently-asked-questions/employment-faq/federal-hiring/how-do-i-apply-for-federal-jobs/ Students enrolled in a qualifying degree program can apply if the anticipated graduation date is within six months of closing date of the announcement. Graduation transcript must be received before start date. Other applicants must meet all qualification requirements by the closing date of this announcement.
Major Duties
As a General Engineer (Inspector), you will: Conduct safety program reviews and provide engineering analyses and evaluations of potential pipeline safety regulatory deficiencies. Interpret and apply Federal regulations and monitor the design, construction, operation and maintenance of gas and liquid pipeline systems. Evaluate projects to determine compliance with existing Federal safety regulations. Recognize discrepancies or inconsistencies between information reported or made available to the office of Pipeline safety and the true nature of the activity under review. Participate in technical conferences, symposia and meetings as a technical expert and authority on safety issues related to the pipeline industry. The ideal candidate for this position is a General Engineer who is seeking a challenging assignment performing Federal pipeline safety compliance inspections; evaluating intrastate and interstate pipeline operators.
Conditions of Employment
CONDITIONS OF EMPLOYMENT: As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance the organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service. Upon completion of your probationary period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest. SELECTIVE SERVICE: Males born after 12/31/1959 must be registered for the Selective Service. GOVERNMENT TRAVEL CARD: This position involves travel. A government contractor-issued travel card will be issued and must be retained for official business only. FINANCIAL DISCLOSURE: The Ethics in Government Act of 1978 requires the applicant selected for this position to submit a Confidential Financial Disclosure Report (OGE Form 450) within 30 days of appointment and annually thereafter. DRUG TEST: This position has been determined to be a critical safety/security position as defined in the Department of Transportation (DOT) Order, DOT 3910.1D entitled "Drug and Alcohol-Free Departmental Workplace." Therefore, if selected for the position you will be required to submit to a pre-employment/pre-appointment drug test, you will also be subject to Random Drug Testing. DRIVER'S LICENSE: The applicant must be able to obtain and retain a valid state-issued driver's license. PCS/RELOCATION/RECRUITMENT: Permanent Change of Station (PCS), Relocation, and Recruitment Incentive authorization varies by position/selection and a service agreement may be required. PROBATIONARY PERIOD: Applicants may be required to successfully complete a one-year probationary period (unless already completed).
Education
MANDATORY EDUCATION REQUIREMENTS: A. DEGREE: ENGINEERING --To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. <B>OR</b> B. COMBINATION OF EDUCATION AND EXPERIENCE -- College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive). All applicants must meet the education requirements under A or B to qualify for applying to an engineering position. Transcripts are required for this position.
How You Will Be Evaluated
DESCRIBING YOUR EXPERIENCE: PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. If your resume/application does not support your questionnaire answers, we will not allow credit for your response(s). Your resume must contain sufficiently detailed information upon which to make a qualification determination. Please ensure that your resume contains specific information such as position titles, beginning and ending dates of employment for each position, average number of hours worked per week, and if the position is/was in the Federal government, you should provide the position series and grade level. All applicants: For this announcement, applicants may be reviewed to determine if they meet the basic qualifications for this position, specifically the educational requirements. Applications that are verified to meet the basic qualifications may be referred to the selecting official. Applicants will not be rated or ranked. Veteran's Preference does NOT apply. Please ensure that your work history provides enough details to support your answers. You may preview questions for this vacancy.
Additional Information
The Fair Chance to Compete for Jobs Act prohibits the Department of Transportation and its Operating Administrations from requesting an applicant's criminal history record before that individual receives a conditional offer of employment. In accordance with 5 U.S. Code § 9202(c) and 5 C.F.R § 920.201 certain positions are exempt from the provisions of the Fair Chance to Compete Act. Applicants who believe they have been subjected to a violation of the Fair Chance to Compete for Jobs Act, may submit a written complaint to the Department of Transportation by email at, [email protected]. To learn more, please visit our page at: The Fair Chance to Compete Act | US Department of Transportation This announcement may be used to fill additional positions if similar vacancies occur within 90 days of the issue date of the referral certificate. Qualified CTAP/ICTAP candidates receive priority and will be referred to the hiring manager.
How to Apply
You must submit a complete application package (including resume, vacancy questions and supporting documents) no later than 11:59 pm (EST) on the closing date of the announcement. To begin, click the "Apply Online" button on the job announcement posting. Follow the directions to register, submit all required documents and complete the assessment questionnaire. You may review your saved application(s) at https://help.usajobs.gov/ If you are having difficulty applying online, please contact the DOT Automated Staffing Office via email at: [email protected]
Required Documents
RESUME: In accordance with the OPM memorandum titled Merit Hiring Plan, dated May 29, 2025, resumes with a maximum of two (2) pages in length will be accepted as part of your application. These should be legible and in a readable font size. A determination of your eligibility and/or qualifications will be based only on those two (2) pages. Your resume MUST contain specific information that can be used to make a qualification determination, including employment beginning and ending dates for each position, whether employment is Full-time or Part-time, or average number of hours worked per week, and position titles. If the position is/was in the Federal government, you will need to provide the position series and grade level. The resume should show relevant experience and education, as well as support the required specialized experience. For assistance with the resume builder, please visit: https://help.usajobs.gov/how-to TRANSCRIPTS are REQUIRED (For the GS-11 Only) as there is a stated education requirement for the series. The transcripts need not be official, but must show that you meet the stated education requirements, including specific major or class requirements. ENGINEERS: As you are applying to an engineering position and are qualifying based on possessing a current Professional Engineer (PE) license, or passing the Engineer in Training (EIT) exam, please provide a copy of PE license or written documented proof of passing the EIT. DISPLACED EMPLOYEES: If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the standards for this vacancy and provide all of the following documents: your most recent performance appraisal, the proof of eligibility letter from the Agency, and your most current SF-50, displaying current series and grade. Displaced employees may be eligible for ICTAP or CTAP priority consideration. For more information, please review the OPM Employee's Guide to Career Transition. Failure to submit any of the required documents by the closing date of the vacancy will result in your removal from consideration for this position. Please review your application prior to final submission and ensure you have submitted all appropriate documents. Uploading documents to USA Jobs does NOT ensure inclusion with your application to our system. You must verify that the documents are in the system with your application prior to final submission.
Frequently Asked Questions
What is the salary for the General Engineer (Inspector) - DIRECT HIRE position at Pipeline and Hazardous Materials Safety Administration?
The salary range for this position is $74,678 - $163,062/yr. This is a GS-11/13 position on the General Schedule pay scale. Actual pay may vary based on locality adjustments.
Where is the General Engineer (Inspector) - DIRECT HIRE job located?
This position is located in Anchorage, Alaska. This is an on-site position.
What qualifications do I need?
To meet the minimum qualifications for this position, you must meet either the education specialized experience requirements for the grade at which you are requesting consideration. To qualify for the GS-11 on Experience, you must have at least one year of experience equal or equivalent to the GS-09 it must include: Experience creating or review...
How do I apply for this position?
Apply through USAJobs.gov by clicking the 'Apply on USAJobs' button. You'll need a USAJobs account, a federal-style resume, and supporting documents. The deadline is Mar 16, 2026.
Is a security clearance required?
No security clearance is required for this position.
What does GS-11/13 mean?
GS-11/13 refers to the General Schedule grade level. Higher grades require more experience and offer higher pay. Visit our GS Pay Scale page for full salary tables by grade and locality.
What benefits do federal employees receive?
Federal employees receive comprehensive benefits including health insurance (FEHB), retirement through FERS, Thrift Savings Plan (TSP) with government matching, paid annual and sick leave, paid parental leave, life insurance, and student loan repayment programs.