About This Position
The position(s) covered by this vacancy announcement is in the Department of Defense (DoD) Acquisition Workforce Personnel Demonstration Project (AcqDemo). For more information please see: AcqDemo This position is part of the Defense Microelectronics Activity. The incumbent serves as a key member in the Modeling and Simulation Team in support of the DMEA Foundry team.
Qualifications
To qualify for an Electronics Engineer, NH-0855-03 position, your resume and supporting documentation must support: A. One year of specialized experience equivalent to the NH-02 (GS-11 equivalent) grade level in the Federal service: Foundational experience in a relevant scientific or engineering field, such as solid-state physics, materials science, or electrical engineering. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience. In addition to meeting qualifications, your application package must reflect the applicable experience to meet the Individual Occupational Requirements for the 0855, series as listed below: A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) **NOTE: Failure to provide transcripts will result in you being rated ineligible for this position.
Major Duties
This position is being filled under the memorandum from the Under Secretary of Defense for Personnel and Readiness (USD(P&R)) "Expansion of Direct Hire Authority for Certain Personnel of the Department of Defense," dated October 15, 2021. As a Electronics Engineer at the NH-0855-3 some of your typical work assignments may include: Serves as key member in the Modeling and Simulation team in support of the DMEA Foundry team. Responsible for the design and optimization of TCAD device simulations to accurately represent next generation SiC and/or Si power device behavior and performance. Responsible for executing device testing and characterization to ensure device operation. Performs measurements with semiconductor device parameter analyzers and semi-automated wafer probe systems, LCR meters, oscilloscopes, etc. Measures semiconductor devices at wafer-level or package-level to verify electrical behavior and extract key performance parameters. Assists the lead Process Control Monitoring (PCM) engineer to verify PCM test structure electrical behavior. Assists in the design of PCM test structures to validate process/device performance and monitor process stability using Cadence Virtuoso for design/layout activities. Identifies device requirements and key system performance parameters to analyze results from electrical/reliability testing and provides feedback to the Foundry team.
Education
Substitution of education may not be used in lieu of specialized experience for this grade level. FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html **NOTE: Failure to provide transcripts will result in you being rated ineligible for this position.
How You Will Be Evaluated
We will review your resume and supporting documents, to ensure you meet the basic qualification requirements. We will evaluate each applicant who meets the basic qualifications on the information provided and evaluate your relevant work experiences as it relates to fundamental competencies, identified below, required for this position. Traditional rating and ranking of applications does not apply to this vacancy. Your application (resume and supporting documentation) will be evaluated to determine if you meet the minimum qualifications required as listed on the announcement under qualification requirements. Veterans Preference: If you are entitled to veterans preference, you should indicate the type of veterans' preference you are claiming on your resume. Your veterans' preference entitlement will be verified by the employing agency. For information on entitlement see http://www.fedshirevets.gov/job/vetpref/index.aspx Appointment of Military Spouses (5 CFR 315.612) (NonComp Mil Sp): To receive this preference, you must choose to apply using the " Appointment of Military Spouses (5 CFR 315.612) (NonComp Mil Sp)" eligibility. If you are claiming Military Spouse eligibility and are determined to be Well Qualified (score of 85 or above) for the position, you will be referred to the hiring manager. Information and required documentation for claiming Military Spouse eligibility may be found at the General Applicant Information and Definitions link below.
Additional Information
Other Notes: Direct Deposit of Pay is required. Multiple positions may be filled from this announcement. The overall salary range listed above is provided for informational purposes as it represents the full range that is applicable to current employees in this occupation/grade; however, a selectee's initial pay is always set below the maximum rate of the range. Payment of Permanent Change of Station (PCS) costs are not authorized based on a determination that a PCS move is not in the Agency's interest. Relocation and/or Recruitment incentive may be authorized if determined by the Hiring Manager to be in the best interest of the Agency. Telework is available in accordance with DOD Policy basis. Remote work is not authorized. Re-employed Annuitant: If you have retired from civilian federal service and you are interested in employment as a re-employed annuitant, information can be found at: Reemployed Annuitants | DCPAS (osd.mil) Males born after 12-31-59 must be registered or exempt from Selective Service (see Who Needs to Register | Selective Service System : Selective Service System (sss.gov)) All applicants must meet qualifications and eligibility criteria by the closing date of the announcement.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. The complete application package must be submitted by 11:59 PM (EST) on the closing date to receive consideration. To begin, click Apply Online to access an online application. Follow the prompts to select your USAJOBS resume and/or other supporting documents. You will need to be logged into your USAJOBS account or you may need to create a new account. You will be taken to an online application. Complete the online application, verify the required documentation, and submit the application. NOTE: Resumes up to a total of two pages will be accepted. Resumes exceeding two pages will be removed from consideration. You will receive an email notification when your application has been received for the announcement. To verify the status of your application, log into your USAJOBS account, https://www.usajobs.gov, select the Application Status link and then select the More Information link for this position. The Application Status page will display the status of your application, the documentation received and processed, and your responses submitted to the online application. Your uploaded documents may take several hours to clear the virus scan process. To preview the questionnaire, please go to https://apply.usastaffing.gov/ViewQuestionnaire/12872024 Please review the General Application Information and Definitions at: https://www.dla.mil/Portals/104/Documents/Careers/downloads/DoDGenAppInfo%2012-1-2020.pdf?ver=ECNbdsHtGilTd3OENN4A0Q%3d%3d
Required Documents
The documents you are required to submit vary based on the authority you are using to apply (i.e., applying as a veteran, applying as a current permanent Federal employee, applying as a reinstatement, etc.). Your complete application includes your COMPLETE resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further. The following documents are REQUIRED 1. Your resume: IMPORTANT UPDATE: Your resume must not exceed two (2) pages. If your resume exceeds the two-page limit, you will be removed from consideration for this announcement. The resume and required supporting documentation should provide the minimum qualifications and relevant experience for the announced position. Must include the work schedule, hours worked per week, dates of employment, and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for qualifications and referred for selection consideration, if eligible. The resume must not be more than 5MB and should be saved and uploaded as a PDF to maintain formatting and number of pages. We also accept GIF, JPG, JPEG, PNG, RTF, TXT, PDF, ODT or Word (DOC or DOCX). We do not accept PDF portfolio files. Page margins should be 0.5 inches, and font styles must be legible. Consider using 14-point size font for titles and 10-point for the main text. We recommend using a font like Lato, if available. Other widely available options are Calibri, Helvetica, Arial, Verdana, Open San Source Sans Pro, Roboto or Noro Sans. Additional guidance on writing a federal resume can be found at: USAJOBS Help Center - How do I write a resume for a federal job? The resume builder can help you create a resume using these recommendations and uses the information in your USAJOBS profile to help you get started. 2. Transcripts: This position has a degree or education requirement so you are required to submit a copy of your transcript 3. SF50 All current and former civilian Federal employees must submit a copy of your MOST RECENT SF50 (Notification of Personnel Action) showing your tenure, grade and step, salary, and type of position occupied (i.e., Excepted or Competitive); or similar Notification of Personnel Action documentation, i.e., Transcript of Service, Form 1150, etc. This is also a requirement to verify your Time in Grade (TIG). 4. Veteran's Documents: If applying using veteran's preference or under a Veteran's hiring authority you must submit the following documents: DD214 showing character of service, SF-15 Form and VA letter showing final percentage, or certification of expected discharge or release from active duty. PLEASE REVIEW THE BELOW LINK FOR OTHER SUPPORTING DOCUMENTS needed for proof of eligibility: https://www.dla.mil/Portals/104/Documents/Careers/downloads/DODCustomersRequiredSupportingDocumentation.pdf?
Frequently Asked Questions
What is the salary for the Electronics Engineer position at Defense Microelectronics Activity?
The salary range for this position is $99,218 - $153,382/yr. This is a NH-3 position on the General Schedule pay scale. Actual pay may vary based on locality adjustments.
Where is the Electronics Engineer job located?
This position is located in McClellan, California. This is an on-site position.
What qualifications do I need?
To qualify for an Electronics Engineer, NH-0855-03 position, your resume and supporting documentation must support: A. One year of specialized experience equivalent to the NH-02 (GS-11 equivalent) grade level in the Federal service: Foundational experience in a relevant scientific or engineering field, such as solid-state physics, materials scie...
How do I apply for this position?
Apply through USAJobs.gov by clicking the 'Apply on USAJobs' button. You'll need a USAJobs account, a federal-style resume, and supporting documents. The deadline is Feb 25, 2026.
Is a security clearance required?
Yes, a Secret clearance is required.
What does NH-3 mean?
NH-3 refers to the General Schedule grade level. Higher grades require more experience and offer higher pay. Visit our GS Pay Scale page for full salary tables by grade and locality.
What benefits do federal employees receive?
Federal employees receive comprehensive benefits including health insurance (FEHB), retirement through FERS, Thrift Savings Plan (TSP) with government matching, paid annual and sick leave, paid parental leave, life insurance, and student loan repayment programs.