ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32)
About This Position
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC (TITLE 32), Position Description Number D0872P01 and is part of the NC ASO, National Guard (AASF 1/ Manning Doc 4621-184).
Qualifications
Military Grades: Enlisted (E7 and below) & Warrant (WO1) Minimum Requirements: Experience or training which demonstrates the applicants knowledge of electronic theories and practices to identify, isolate and repair malfunctions in one or more complex integrated systems where knowledge of the entire system is necessary to interpret error data and trace back through a number of units of the system to locate deficiencies. Thorough knowledge of principles of digital and analog circuits, electro-mechanical devices, solid state devices, digital techniques, synchro/servo operation and integrated circuit theory. Ability to interpret and trace schematics, logic and wiring diagrams and use a wide variety of test, measurement, and diagnostic equipment (TMDE).
SPECIALIZED EXPERIENCE: 18 months experience or training in utilizing principles, basic functions and application of theory of electronic integrated systems equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic integrated systems equipment. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment.
Experience in using a wide variety of test, measurement, and diagnostic equipment (TMDE). Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
Major Duties
As an Electronics Integrated Systems Mechanic, WG-2610-12 (ADDEND 3), you will perform operational checks, inspections, tests and troubleshooting on electronic integrated systems; complete operational checks, inspections, tests and troubleshooting of Line Replaceable Units (LRU); solve problems by analyzing installation, circuitry, and operating characteristics of the systems; adjust and aligns sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components; remove faulty LRUs for shop repair; install serviceable components into aircraft and perform total systems alignments; accomplish technical manual compliance and modification of components and systems and complete systems checkout for proper operation; maintain, modify, calibrate and inspect a wide variety of user test, measurement, and diagnostic equipment; complete bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units; use a variety of test equipment such as automatic test equipment, oscilloscopes, DTA computer, multi-meters, power-meters, and special purpose bench test sets; test and troubleshoot solid state electronic assemblies and subassemblies; identify faulty parts and repair; ensure and certify operational integrity of night vision systems and electro-optical components; perform alignment and make shop checks; conduct debriefing of aircrews to determine the nature of system malfunctions and document maintenance performed and record information related to the system, LRU's, or shop repairable units on both aircraft and historical records; serve as member of flight crew for the purpose of diagnosing and recording malfunctions; guide lower level mechanics in the performance of duties; conduct on-the-job training on assigned systems; ensure that material and equipment are properly stored, protected and maintained and that funds are not obligated for material or parts without proper justification; prepare for and participate in various types of readiness evaluations; serve as CADS/PADS Coordinator ensuring explosive cartridges are ordered through TAMIS; track aircraft CADS/PADS status; receive explosives from ammunition supply point and issue to users; transport explosives; store and dispose of out of date explosives.
How You Will Be Evaluated
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position.
If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):
Additional Information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12999476 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application.
You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package.
You will have the opportunity to upload additional documents to include in your application before it is submitted.
Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position.
Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Required Documents
To apply for this position, you must submit a complete Application Package which includes: 1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed. 2. Other supporting documents: