About This Position
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a ELECTRONIC INTEGRATED SYSTEMS MECHANIC, Position Description Number D0872P01 and is part of the ARMY AVIATION SUPPORT FACILITY 3, National Guard. This vacancy does not meet the criteria for appointment of annuitants.
Qualifications
Military Grades: ENLISTED GENERAL EXPERIENCE: Must have a validated understanding of the basic principles and concepts of the occupational series and grade. SPECIALIZED EXPERIENCE: Must have at least 24 months of skill, knowledge, and abilities of the FWS 2610 work at the Electronics Branch of an Army Aviation Support Facility (AASF), Army Aviation Flight Activity (AAFA), or Theatre Aviation Sustainment Maintenance Group (TASMG). Must have competencies in performing electronic integrated systems work activities on Army National Guard helicopters such as installing, troubleshooting, repairing, modifying, calibrating, aligning, and maintaining these systems. Skilled in performing operational checks, inspections, tests, and troubleshooting on electronic integrated systems composed of a number of sensor subsystems: Integrated Vehicle Health Management System (IVHMS), the Common Missile Warning System (CMWS), the Improved Countermeasure Dispenser System (ICMD), the Night Vision Goggle System (NVG), the ARNG Data Subsystem, the Attitude Heading Reference System (AHRS) and Doppler/GPS Navigation System (DGNS), Command Instrument Set (CIS); a logic subsystem-- Multiplex Data Bus System (MUX), the Multiplex Remote Terminal Units (MRTU), Data Link Terminal Units (DLTU), and Digital Automatic Flight Control System (DAFCS); and actuating subsystems--Digital Automatic Stabilization System (DASS), which includes the Stability Augmentation System (SAS) and Command Augmentation System (CAS) and Hover Augmentation System (HAS). Skilled in conducting operational checks, inspections, tests and troubleshooting of Line Replaceable Units (LRU). Experienced in isolating unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Competency in identifying and solving problems system concerns by analyzing installation, circuitry, and operating characteristics of these systems. Skilled in adjusting and aligning sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components. Have technical expertise in removing faulty LRUs for shop repair. Skilled and knowledgeable in the installation of serviceable components into the aircraft and in performing total systems alignments, in accordance with existing technical manuals and directives. Accomplished in following technical manual compliance and modification of components and systems; and, and skilled in completing systems checks for proper operations. Skilled in maintaining, modifying, calibrating and inspecting a wide variety of user tests, measurements, and diagnostic equipment (TMDE). Skilled in completing bench checks, testing, repairs, inspections, modifications, programming, reprogramming, mating, adjusting, alignments, and analyzing of LRUs and shop replaceable units. Experienced in using a variety of test equipment such as automatic test equipment (ATE), oscilloscopes, DTA computer, multi-meters, power-meters, and special purpose bench test sets. Competent to test and troubleshoot solid state electronic assemblies and subassemblies such as, circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read-only memories and various integrated circuits. Capable to certify the operational integrity of various night vision systems, and electro-optical components. Skilled in recognizing methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data. Experienced in debriefing aircrews to determine the nature of system malfunctions, then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records. Should have experience as a flight crew member for the purpose of diagnosing and recording malfunctions or otherwise determining maintenance and repair requirements. Experienced in providing instructional training to other mechanics regarding the repair of computer controlled automatic test equipment, line replaceable units and aircraft integrated systems. Experiences included participation in various types of readiness evaluations such as, Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May have experience in performing additional duties such as structural firefighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or served as a member of a team to cope with natural disasters or civil emergencies. Knowledgeable in safety, fire, security, and housekeeping regulations.
Major Duties
This position is located in the Electronics Branch of an Army Aviation Support Facility (AASF), Army Aviation Flight Activity (AAFA), or Theatre Aviation Sustainment Maintenance Group (TASMG). Its purpose is to perform work involved in installing, troubleshooting, repairing, modifying, calibrating, aligning, and maintaining the complete electronic integrated systems on Army National Guard helicopters.
Education
A high school diploma or GED, are mandatory requirements. Completion of high school courses in physics, algebra, trigonometry, and computer principles is desirable. Higher academic college courses and degrees, that are aligned within the FWS Series 2610 work tasks, are also desirable You must provide a copy of Official Transcripts as documentation to support your educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.
How You Will Be Evaluated
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): Ability to Inspect Ability to Provide Production Support Services Knowledge of Equipment Assembly, Installation, and Repair, etc.
Additional Information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). ADDITIONAL CONDITIONS OF EMPLOYMENT: The employee requires routine access to classified Secret material or similar environment. For award and retention of a compatible position rank and unit assignment, the employee must have a current National Agency Check, Local Agency Checks and Credit (NACLC) according to the U.S. Army Personnel Security Program Management. The employee's clearance reinvestigations are opened prior to the expiration of his or her current investigations.
How to Apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12884814 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Required Documents
To apply for this position, you must submit a complete Application Package which includes: 1. Detailed resume to include employer, job title with to and from dates, duties, responsibilities, and experience gained in each position held. Resumes cannot be more than two pages in length. If the resume provided is longer than two pages, it will not move forward in the qualification process. The resume provided must have relevant experience pertaining to the position in which you are applying to. If military or civilian, please include your rank and/or grade. If your resume does not meet the above requirements, you will automatically be disqualified for the position. 2. Most recent SF 50 is required. SF 50 must have an effective date within one year of application date. 3. High School Diploma or GED required. 4. Official college transcripts, if qualifying based on education.
Frequently Asked Questions
What is the salary for the ELECTRONIC INTEGRATED SYSTEMS MECHANIC position at Army National Guard Units?
The salary range for this position is $35 - $40/hr. This is a WG-12 position on the General Schedule pay scale. Actual pay may vary based on locality adjustments.
Where is the ELECTRONIC INTEGRATED SYSTEMS MECHANIC job located?
This position is located in Latham, New York. This is an on-site position.
What qualifications do I need?
Military Grades: ENLISTED GENERAL EXPERIENCE: Must have a validated understanding of the basic principles and concepts of the occupational series and grade. SPECIALIZED EXPERIENCE: Must have at least 24 months of skill, knowledge, and abilities of the FWS 2610 work at the Electronics Branch of an Army Aviation Support Facility (AASF), Army Aviat...
How do I apply for this position?
Apply through USAJobs.gov by clicking the 'Apply on USAJobs' button. You'll need a USAJobs account, a federal-style resume, and supporting documents. The deadline is Feb 26, 2026.
Is a security clearance required?
Yes, a Secret clearance is required.
What does WG-12 mean?
WG-12 refers to the General Schedule grade level. Higher grades require more experience and offer higher pay. Visit our GS Pay Scale page for full salary tables by grade and locality.
What benefits do federal employees receive?
Federal employees receive comprehensive benefits including health insurance (FEHB), retirement through FERS, Thrift Savings Plan (TSP) with government matching, paid annual and sick leave, paid parental leave, life insurance, and student loan repayment programs.