Federal
AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC
Air National Guard Units · Department of the Air Force
About This Position
This is a National Guard Title 32 Excepted Position for an AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC, Position Description Number D1367000 and is a part of the 169 MXS, South Carolina Air National Guard.
Qualifications
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION OPEN TO THE FOLLOWING AREA OF CONSIDERATION (AOC) 2 ONLY: AOC DEFINITIONS: Area 1: Current permanent employees of the South Carolina Air National Guard. (Note-Temporary and Indefinite employees do not meet permanent tenure requirements and will not qualify for this AOC) Area 2: Current members of the South Carolina Air National Guard. Area 3: Any individual eligible for membership in the South Carolina Air National Guard. Min/Max Military Grades: AB/E-1, AMN/E-2, A1C/E-3, SrA/E-4, SSgt/E-5, TSgt/E-6 MILITARY REQUIREMENTS: Upon selection, individuals must be assigned to a compatible military AFSC in accordance with statutes and National Guard Bureau regulations and must obtain/maintain all requirements of the AFSC. MINIMUM EXPERIENCE REQUIREMENTS: Experience or training which demonstrates your knowledge of basic electrical and mechanical principles; knowledge of troubleshooting procedures used to isolate malfunctions in aircraft pneudraulic systems; and ability to use technical manuals, equipment specifications, and test calibration procedures in performing the work. SPECIALIZED EXPERIENCE REQUIREMENTS: Experience or training which provided a knowledge of basic electrical and mechanical principles. Experience in fabricating fuel, oil and vacuum hose lines. Experience in servicing, maintaining, disassembling assembling, repairing and testing hydraulic and pneumatic systems. Experience in diagnosing malfunctions and overhauling pneudraulic accessories by disassembling, cleaning part and examining parts. Experience in diagnosing trouble and determining remedies. Experience in repairing, rebuilding and overhauling major systems of ground equipment and pneumatic and hydraulic systems. Experience in mechanical repairs using hand tools and test equipment. Experience that demonstrates the ability to interpret technical manuals, specifications and publications. CONDITIONS OF EMPLOYMENT & NOTES: Eligible for NGB Non-Aviator Flying Status when designated to participate in Army Maintenance Test Flights. 1. Must be able to obtain and maintain the appropriate security clearance of the position. 2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. 3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. 4. May occasionally be required to work other than normal duty hours; overtime may be required. 5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
Major Duties
This position is located in a National Guard aircraft maintenance organization. Its primary purpose is to perform on- and/or off-equipment maintenance on assigned aircraft pneudraulic systems, components and related aerospace ground equipment. Performs maintenance and operational and functional checks on assigned pneudraulic systems. Troubleshoots, removes, inspects, installs, repairs, modifies, rebuilds, and/or tests pneudraulic systems and components for aircraft pneudraulic systems, associated ground support equipment, and/or related test equipment. Accomplishes periodic and special inspections on hydraulic components. Inspects all components and subsystems for operation, internal, and external leakage and servicing. Operates portable test stands for checkout of pneudraulic system. Removes, installs, and/or repairs Pneudraulic components from aircraft and associated aerospace ground equipment. Removes, disassembles, cleans, repairs, assembles components, and tests completed unit. Operates test equipment for all hydraulic components. Inspects for cracks, scratches, nicks, and holes on seals, gaskets, packings, and hoses. Modifies systems and their components. Rigs, adjusts, and aligns hydraulic components to ensure maximum operating efficiency. Polishes cylinders and pistons to ensure proper fit. Investigates pneudraulic failures to determine causes and accomplishes corrective maintenance.
How You Will Be Evaluated
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): Ability to Interpret Instructions, Specifications, etc. (Includes Blueprint Reading), Integrity/Honesty, and Knowledge of Equipment Assembly, Installation, and Repair, etc.
Additional Information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx). If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
How to Apply
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Required Documents
To apply for this position, you must submit a complete Application Package which includes: 1. Your resume showing work schedule, hours worked per week, dates of employment and duties performed (REQUIRED). Resumes that do not sufficiently show the required experience in detail, as well as resumes that list accolades and not relatable experience may not be considered. 2. Other supporting documents: DD 214's, SF 50's, and other supporting documents are encouraged but not required.
Frequently Asked Questions
What is the salary for the AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC position at Air National Guard Units?
The salary range for this position is $31 - $36/hr. This is a WG-10 position on the General Schedule pay scale. Actual pay may vary based on locality adjustments.
Where is the AIRCRAFT PNEUDRAULIC SYSTEMS MECHANIC job located?
This position is located in Eastover, South Carolina. This is an on-site position.
What qualifications do I need?
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION OPEN TO THE FOLLOWING AREA OF CONSIDERATION (AOC) 2 ONLY: AOC DEFINITIONS: Area 1: Current permanent employees of the South Carolina Air National Guard. (Note-Temporary and Indefinite employees do not meet permanent tenure requirements and will not qualify for this AOC) Area 2: Current ...
How do I apply for this position?
Apply through USAJobs.gov by clicking the 'Apply on USAJobs' button. You'll need a USAJobs account, a federal-style resume, and supporting documents. The deadline is Feb 25, 2026.
Is a security clearance required?
Yes, a Secret clearance is required.
What does WG-10 mean?
WG-10 refers to the General Schedule grade level. Higher grades require more experience and offer higher pay. Visit our GS Pay Scale page for full salary tables by grade and locality.
What benefits do federal employees receive?
Federal employees receive comprehensive benefits including health insurance (FEHB), retirement through FERS, Thrift Savings Plan (TSP) with government matching, paid annual and sick leave, paid parental leave, life insurance, and student loan repayment programs.