AIRCRAFT ENGINE MECHANIC

This position is located in an Air National Guard Aviation Wing, Maintenance Group, Maintenance Squadron, Propulsion Element, (Jet Engine Intermediated Maintenance (JEIM) and the Hush House). The primary purpose of this position is to maintain, troubleshoot, remove, repair, install, certify, test and perform operational checks on the turboprop engines, propellers, and associated propulsion system components. Removes, installs, certifies, repairs, modifies, overhauls, and installs turboprop engines, reduction gear boxes, turbine modules, compressor modules, auxiliary power units, propellers and related propeller components as required.

Performs maintenance on all propulsion systems including troubleshooting and diagnosing defects, certifying, conducting bench checks, performing in-shop and on-equipment repairs and overhauls. Diagnoses malfunctions using computerized test equipment, schematic diagrams, technical publications and performs the appropriate repair according to the test results and analysis. Determines the extent of disassembly necessary to repair, overhaul, replace and certify all engine, propeller and auxiliary power unit parts.

Cleans and inspects engine and propeller component parts such as turbines, gearboxes, blades, gears, bearings, etc. Assembles engines, propellers and auxiliary power units, adhering to prescribed procedures, torque values, safety methods and clearances. Troubleshoots propellers using electric and hydraulic test stands to check for proper operation and evidence of oil leakage.

Operationally checks engines and propeller assemblies and auxiliary power units, by using the engine test cell facility to meet all full power run checks on the engine and propeller assemblies and auxiliary power units. Modifies engines, propellers, auxiliary power units, and components in accordance with Time Compliance Technical Orders (TCTO) directives; removes and installs engine quick change kits; prepares engines for installation and installs engine and propeller assemblies on aircraft. Evaluates technical problems of repair, overhaul, modification and installation of aircraft propulsion systems.

Solves all types of maintenance problems and performs bench checks and test engine and propeller assemblies for serviceability. Performs operational checks of installed propellers, engines, auxiliary power units and sub-systems during aircraft maintenance ground runs in accordance with approved checklists. Employs test equipment such as computer borescope, fuel pressure gauges, air pressure gauges, and alignment fixtures.

Utilizes special tools and precision measuring equipment, high-pressure hydraulic test equipment, and electronic test equipment. Performs isochronal and special evaluations on engines, propellers and auxiliary power units. Interprets certification findings and determines adequacy of corrective action.

Certifies installed and repaired engines for compliance with technical publications. Performs fixed and mobile test stand functions (which may include maintenance of engine test cell facility); installs special test equipment; performs pre-operational and post operational checks. Operates engines and propellers and records test data.

Performs aircraft full power runs and complete engine and propeller efficiency checks. Clears Red X symbol documentation on engine and propeller related components. Prepares man-hour data collection and required forms for input into the Core Automated Maintenance System (CAMS) or the G081 (AFI 22-2101, CAMS for Mobility).

Reviews and assists in maintaining Technical Orders (TOs) and other technical publications and directives pertinent to the element. Maintains bench stock, parts, and equipment. Assists the material control function in identifying part numbers and stock numbers for processing and controlling of repair cycle assets.

Provides on-the-job training for assigned personnel. Plans and conducts formal classes of instruction in techniques of repair and maintenance of aircraft engine, propeller, auxiliary power unit, and related equipment and in the use of diagrams, blueprints, wiring schematics and technical publications. Evaluates effectiveness of training by observation and through written and oral examinations.

Advises supervisor of the experience and skill levels of assigned personnel. Maintains training documentation. Performs other duties as assigned.

You must provide transcripts or other documentation to support your Educational claims. To receive credit for Education, you must provide documentation of proof that you meet the Education requirements for this position.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position.

If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). PROBATIONARY PERIOD: As a condition of employment for accepting this position, you will be required to serve a 2-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest. In determining if your employment advances the public interest, we may consider: - your performance and conduct; - the needs and interests of the agency; - whether your continued employment would advance organizational goals of the agency or the Government; and - whether your continued employment would advance the efficiency of the Federal service.

Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12956889 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application.

You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.

Follow the prompts to select your resume and/or other supporting documents to be included with your application package.

You will have the opportunity to upload additional documents to include in your application before it is submitted.

Your uploaded documents may take several hours to clear the virus scan process.

After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.

You will be taken to the online application which you must complete in order to apply for the position.

Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.

To apply for this position, you must submit a complete Application Package which includes: 1.

Your resume showing: Contact Information-your name and the best way to contact you. Relevant work experience-include the employer's name, job title, start and end dates (month/year), the number of hours worked per week and describe how you meet the required qualifications of the job. Federal jobs should include series and grade. Education, certifications or licensures.